Multicam Loadouts

Zeonprime · February 25th, 2010, 12:06

Quote:

Originally Posted by coachster

with all that padding, I can still find the soft spots! well, spot. check that, there's a spot on either side so spots is correct!

also, with all that gear, you're too fat for the reach around. you've been cut off!

I have no doubt that people will look for "kinks" in the armor and just aim for those spots...damn you snipers!!!

Quote:

Originally Posted by ThunderCactus

1) I moved out and my room is no longer messy, although there's always a few guns in there under repair
2) That's my buddy's hicapa I was using between the time that I sold my beretta and waiting for my 1911 MEU
3) It's a standard 3L thermobak, but I'm small and so is my plate carrier lol

ok, your forgiven since you were waiting for a fine ass gun.

I still have a year before my MC has to be complete in time for Claybank 2011.

I have Garmin Rhino's enroute from Edmonton right now, so I still have to find a good pouch for that...UR-Tac makes a pouch that might work. Will know more when I have the Rhinos in hand

Ninja_En_Short · February 25th, 2010, 12:16

Hi guys.

A little question from a former multicam user who wants to get a new set : is there any way to get Crye Precision gear without ebay here ?
I went on their website to get a combat shirt and a Cage Armor (for a heavy config) but they only seem to send in USA.

Zeonprime · February 25th, 2010, 12:31

Quote:

Originally Posted by Ninja_En_Short

Hi guys.

A little question from a former multicam user who wants to get a new set : is there any way to get Crye Precision gear without ebay here ?
I went on their website to get a combat shirt and a Cage Armor (for a heavy config) but they only seem to send in USA.

US will not ship armor outside of country without proper credintials (Military/LEO)

Grey Group Training. But good luck, MC is going to dry up for the next few months while the manufactuers ramp up to outfit the US Army and stocks are depleted from the Army buying lots

Capt.Flan · February 25th, 2010, 12:38

UNICAM guys! UNICAM.

Multicam time is over.

:cry:

:cry:

Ninja_En_Short · February 25th, 2010, 12:45

You sure on the armor ? Last time I checked it was the plates that were forbidden to export, not the carrier itself, I got a Blackhawk Cutaway vest without problem last year.

On the outfit itself I don't think there's going to be a problem with Crye Gear. Uncle Sam ain't going to equip his regular grunts with Crye stuff, more likely to be regular BDU in Multicam fabric.

But the question still remains anyway.

Zeonprime · February 25th, 2010, 13:21

Quote:

Originally Posted by Cpt.Flan

UNICAM guys! UNICAM.

Multicam time is over.

:cry:

:cry:

lol, and that is why the US Army just adopted Multicam right because it's time is over

Quote:

Originally Posted by Ninja_En_Short

You sure on the armor ? Last time I checked it was the plates that were forbidden to export, not the carrier itself, I got a Blackhawk Cutaway vest without problem last year.

On the outfit itself I don't think there's going to be a problem with Crye Gear. Uncle Sam ain't going to equip his regular grunts with Crye stuff, more likely to be regular BDU in Multicam fabric.

But the question still remains anyway.

You asked about the CAGE Armor, which is what I answered. Not an armor carrier. There is a bit of a distinction. Also in regards to the MC stocks, I didnt refer to Crye Gear, but general MC products.

ThunderCactus · February 25th, 2010, 14:08

Well if you just want material that's made FROM crye multicam material, that's REALLY easy since lots of people make it. If you want good tactical pants, scope out ur-tactical.com, they also have a really nice plate carrier!

Zeonprime · February 25th, 2010, 14:11

Quote:

Originally Posted by ThunderCactus

Well if you just want material that's made FROM crye multicam material, that's REALLY easy since lots of people make it. If you want good tactical pants, scope out ur-tactical.com, they also have a really nice plate carrier!

URTactical is great. also SDK and EmdomUSA have some nice options.

Also Blueforce gear (when they have stock!!).

I soo want the DAP from BFG...its on my list for Claybank 2011

Porkchop · February 25th, 2010, 16:19

I'll wait for Multicam DPM, cheers, err..... MTP

lonesniper · February 28th, 2010, 13:11

fall is such convenient weather for multicam

Frozen Tex · February 28th, 2010, 14:14

^^
It sure is...

lonesniper · February 28th, 2010, 16:26

Quote:

Originally Posted by Frozen Tex

^^
It sure is...

haha, in my first pic,my left (your right) leg looks like its dissapearing lol but nice loadout

Frozen Tex · February 28th, 2010, 18:31

Thanks

Nice SCAR, by the way... I've got a FDE Masada that's just waiting for some goodies to attach to it; it'll be my go-to gun for the coming season.

lonesniper · February 28th, 2010, 19:03

Frozen Tex, what are yo using for your "Groin rig" (belt, leg rigs)? lol i have a regular combat belt and a multi-compatable pistol holster for my kjw, but it always pulls the belt down to one side no matter how much I adjust the tightness of either.

Richand · February 28th, 2010, 19:21

I used this for the TAC10 contractor division:

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 25th, 2010, 12:16	#137
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	Hi guys. A little question from a former multicam user who wants to get a new set : is there any way to get Crye Precision gear without ebay here ? I went on their website to get a combat shirt and a Cage Armor (for a heavy config) but they only seem to send in USA. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

February 25th, 2010, 12:38	#139
Capt.Flan Trader rating Join Date: Sep 2008	UNICAM guys! UNICAM. Multicam time is over. :cry::cry::cry: __________________ http://shtyk-nozh.xooit.com/portal.php

February 25th, 2010, 12:45	#140
Ninja_En_Short Trader rating Join Date: Jul 2007 Location: France, Canada (Montréal)	You sure on the armor ? Last time I checked it was the plates that were forbidden to export, not the carrier itself, I got a Blackhawk Cutaway vest without problem last year. On the outfit itself I don't think there's going to be a problem with Crye Gear. Uncle Sam ain't going to equip his regular grunts with Crye stuff, more likely to be regular BDU in Multicam fabric. But the question still remains anyway. __________________ Tous les jours nous nous endormons plus instruits mais pas forcément moins bêtes... I can do a CTRL+ATL+DEL on your gun ! Gun doc in Montreal on AEG, GBB, GBBR and Bolt rifle (gaz and spring) Heavy custom builder (including painting)

February 25th, 2010, 14:08	#142
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Well if you just want material that's made FROM crye multicam material, that's REALLY easy since lots of people make it. If you want good tactical pants, scope out ur-tactical.com, they also have a really nice plate carrier!

February 25th, 2010, 16:19	#144
Porkchop Trader rating Join Date: Dec 2001 Location: St Hubert QC	I'll wait for Multicam DPM, cheers, err..... MTP __________________ Regards, Porkchop Cry "Haddock" and let slip the hounds of Beer [-brought to you courtesy of Salamander Army -] Last edited by Porkchop; February 25th, 2010 at 19:43..

February 28th, 2010, 13:11	#145
lonesniper Trader rating Join Date: Jan 2010 Location: Maryland	fall is such convenient weather for multicam

February 28th, 2010, 14:14	#146
Frozen Tex Trader rating Join Date: Mar 2009 Location: Yellowknife, NT, Great White North	^^ It sure is... __________________ Delenda Est Carthago

February 28th, 2010, 18:31	#148
Frozen Tex Trader rating Join Date: Mar 2009 Location: Yellowknife, NT, Great White North	Thanks Nice SCAR, by the way... I've got a FDE Masada that's just waiting for some goodies to attach to it; it'll be my go-to gun for the coming season. __________________ Delenda Est Carthago

February 28th, 2010, 19:03	#149
lonesniper Trader rating Join Date: Jan 2010 Location: Maryland	Frozen Tex, what are yo using for your "Groin rig" (belt, leg rigs)? lol i have a regular combat belt and a multi-compatable pistol holster for my kjw, but it always pulls the belt down to one side no matter how much I adjust the tightness of either.

February 28th, 2010, 19:21	#150
Richand Trader rating Join Date: Apr 2009 Location: Scarborough, Ontario	I used this for the TAC10 contractor division: __________________ Pacific Recon

Multicam Loadouts

Other Regions