Grenade Launchers - Good, Bad or Stupid ?

[coach]

Originally Posted by arcanuck

I like the grenades that shoot paintballs.

I have 2 of the madbull ones. holds 4 paintballs or about 50-60 BB's and a little tissue wadding. With BB's, they shoot a huge cloud and are awesome for room clearing!

[hymnforthewretched]

Originally Posted by Kuro_Neko

I'm not sure what model you've worked with but my front handguard does not go on or off nearly that easily. First of all, you have to loosen the front sight to get the forward handguard cap loose, then you need to push down the slip ring (which, at least on my model, is really damn strong) then fit the lower handguard on, then fit the forward cap and tighten the front sight again. Without assistance (or the proper takedown tool) this takes a good ten or fifteen minutes. Even with assistance it's going to take a couple of minutes and wouldn't be something I'd want to do in the field.


Kuro_Neko

I have a real steel Kac ras with real steel barrel but, delta, front sight, and cap, on a ptw, im not sure how much more real it gets without going to a real steel weapon.

I can take off my bottom without any major issues. it takes about maybe a minute of tinkering. Its not easy but once you've done it once its not much of an issue. no removal or loosing of anything. Then i simply slide the 203 on then quickly put in two screws on the front mount of the 203. and done. no tools besides a screw driver. and that can be cured with the QD mount. Id say even without the QD mount the 203 can be mounted and taken off with hand guard replaced in under 5 minutes. nothings hard about it and id do it in the field anytime with no fuss.

[Kuro_Neko]

Originally Posted by hymnforthewretched

I have a real steel Kac ras with real steel barrel but, delta, front sight, and cap, on a ptw, im not sure how much more real it gets without going to a real steel weapon.

I can take off my bottom without any major issues. it takes about maybe a minute of tinkering. Its not easy but once you've done it once its not much of an issue. no removal or loosing of anything. Then i simply slide the 203 on then quickly put in two screws on the front mount of the 203. and done. no tools besides a screw driver. and that can be cured with the QD mount. Id say even without the QD mount the 203 can be mounted and taken off with hand guard replaced in under 5 minutes. nothings hard about it and id do it in the field anytime with no fuss.

I wasn't saying that what you have isn't near real. I was just saying that it isn't that easy on my model (CA M15A4), mainly because of a damn strong slip ring but the forward grip cap as well.

Kuro_Neko

[hymnforthewretched]

Originally Posted by Kuro_Neko

I wasn't saying that what you have isn't near real. I was just saying that it isn't that easy on my model (CA M15A4), mainly because of a damn strong slip ring but the forward grip cap as well.

Kuro_Neko

I know you weren't, what im trying to say is that with real stuff its not that hard. The reason its hard for you is because of the dimensions of parts on your gun probably are off form that of the real deal.

The way you made this sound is that everybody's handguards no matter what should be and are hard to take off and need tools. This is not the case if stuff is the right size and set up right.

[hellhound]

what type of grenade would be good for a mosquito mold

[coach]

Originally Posted by hellhound

what type of grenade would be good for a mosquito mold

Madbull Cherries (XM108HP)

[hellhound]

Originally Posted by coachster

Madbull Cherries (XM108HP)

can you use these with any other launchers

[KNIVEZS]

Originally Posted by coachster

Heavy? Sometimes, but you get use to it quick when you can pop off 40mm rounds in the 600-900psi range.

Mine is mounted most time but you'll find it holstered at times when my primary feels heavy near the end of the day.

Old pic

im planning on making something like that

[coach]

Originally Posted by hellhound

can you use these with any other launchers

should be just fine in the mosquito's and other m203's.

[Duckman]

the cherries work fine with the mm mini launcher. you might break your thumb pushing the button if you run the super high psi but they work. they're the easiest to fire from something like Betsy or the agx but the mm mini works too. just needs a little more effort to fire. i have all 3 launchers.

[Kingly]

Seeing as the topic is grenade launchers...

Mad Bull RG108 Barrel-Mounted BB Shower

Im curious to know of its effectiveness.
I assume that this is definetly less common then the conventional grenade launcher, but I suppose one pro would be no need to buy shells. But the Obvious con of time consumption and a "one time" use in combat (due to reload time).

[grimreefer]

Got a new toy.

[Kuro_Neko]

Very nice. What's the upper handguard thing you have on that?

Kuro_Neko

[Styrak]

Originally Posted by Kuro_Neko

Very nice. What's the upper handguard thing you have on that?

Kuro_Neko

Looks like a VLTOR CASV-EL (I'm assuming replica)

[shadow_matter]

Will a CA M203 fit on a CA m16 model?

I've heard some stuff about the under-barrel mount (not ris) version only works for the m4 length barrels. The ca m16 has a one piece reinforced barrel (without the thinner section of tube that the QD mounts usually mount to).