Good NBB Guns

shiftline · March 30th, 2010, 04:20

Ill proballoy modify for propane due to the fact that its 5$ for a can instead of 15-20$

Also the gun im getting has a "leaking mag" im assuming its from running propane without glueing the release valve.. think this is a good bet?

R.I.T.Z · March 30th, 2010, 04:35

Quote:

Originally Posted by shiftline

Ill proballoy modify for propane due to the fact that its 5$ for a can instead of 15-20$

Also the gun im getting has a "leaking mag" im assuming its from running propane without glueing the release valve.. think this is a good bet?

check the seals. see if the 3rd retarded mag pin was drilled then gasket sealant was used.

shiftline · March 30th, 2010, 04:39

I dont have it yet but will do, if it hasn't been done I will try it and hopefully it will work.. atleast until i can order some others

Styrak · March 30th, 2010, 04:45

Quote:

Originally Posted by shiftline

Gotchya, better accuracy is always a plus.. do you guys use propane or green gas or?

Also .25 .28 .3 what works best in them

Green gas IS propane. And yeah use propane.

Use the heaviest weight you can for GBB's, generally 0.28's.

R.I.T.Z · March 30th, 2010, 04:49

Quote:

Originally Posted by Styrak

Green gas IS propane. And yeah use propane.

Use the heaviest weight you can for GBB's, generally 0.28's.

yeah but the mk23 is odd, and doesnt like the higher pressure. so duster has to be used unless the mags are modded

shiftline · March 30th, 2010, 22:43

Ok just ordered my MK23 so hopefully i can fix the mag if not ill just order 2 Y&P

Question for anyone who "upgraded" the stock LAM.. what size mm is the Red LED hole 5mm? I want to order a laser diode to upgrade it.. as well as if anyone can tell me how many mm diameter the flashlight whole is.. aka white led.. Thanks again!

shiftline · March 31st, 2010, 02:59

The only place i can find Y&P Mags that Will ship to canada is Evike, which has tuns of bad reviews so its a last resort.. has anyone found a good source for Y&P/STTI mags within canada or someone better to deal with outside of canada?

six4 · March 31st, 2010, 03:16

The Tm socom mk23 is what gave me the pistol rep I have today. If you cant find the mags you desire just repair the ones you have. After I repaired mine ( thanks still go to "ibby" for the original repair idea ) I was able to get 150bbs with one mag charge of green gas. No joke,I actually counted. I was also able to use the socom in ANY weather,one time at Bigfoot it was so cold the mags had frost on them and I was still getting kills! I would recomend staying with green gas mostly because this pistol is cheap to run and you can easily carry a can of green gas in a pouch. Also,dont mod the lam unit bulb,In my original lam unit I swapped out the white led for a blue one and was virtually undetectable by other players until it was to late. The lam unit is designed to give off low light to help you get where you are going without totally ruining your night vision or give you away.

My two cents.

shiftline · March 31st, 2010, 03:35

Good call withthe lam, maybe i wont swap in a super bright flash light!

As for mags im only getting one leaky one with the gun which i will try and fix, the holster i ordered holds 2 spares, so it would be nice to order them.. just trying to find some propane ready mags so i dont have to hack/mod brand new ones

shiftline · March 31st, 2010, 03:41

Good call with the lam, maybe i wont swap in a super bright flash light!

As for mags im only getting one leaky one with the gun which i will try and fix, the holster i ordered holds 2 spares, so it would be nice to order them.. just trying to find some propane ready mags so i dont have to hack/mod brand new ones

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

March 30th, 2010, 04:20	#46
shiftline Trader rating Join Date: Sep 2004	Ill proballoy modify for propane due to the fact that its 5$ for a can instead of 15-20$ Also the gun im getting has a "leaking mag" im assuming its from running propane without glueing the release valve.. think this is a good bet? __________________ Optical Illusions

March 30th, 2010, 04:39	#48
shiftline Trader rating Join Date: Sep 2004	I dont have it yet but will do, if it hasn't been done I will try it and hopefully it will work.. atleast until i can order some others __________________ Optical Illusions

March 30th, 2010, 22:43	#51
shiftline Trader rating Join Date: Sep 2004	Ok just ordered my MK23 so hopefully i can fix the mag if not ill just order 2 Y&P Question for anyone who "upgraded" the stock LAM.. what size mm is the Red LED hole 5mm? I want to order a laser diode to upgrade it.. as well as if anyone can tell me how many mm diameter the flashlight whole is.. aka white led.. Thanks again! __________________ Optical Illusions

March 31st, 2010, 02:59	#52
shiftline Trader rating Join Date: Sep 2004	The only place i can find Y&P Mags that Will ship to canada is Evike, which has tuns of bad reviews so its a last resort.. has anyone found a good source for Y&P/STTI mags within canada or someone better to deal with outside of canada? __________________ Optical Illusions

March 31st, 2010, 03:16	#53
six4 Trader rating Join Date: Jan 2006 Location: mission b.c.	The Tm socom mk23 is what gave me the pistol rep I have today. If you cant find the mags you desire just repair the ones you have. After I repaired mine ( thanks still go to "ibby" for the original repair idea ) I was able to get 150bbs with one mag charge of green gas. No joke,I actually counted. I was also able to use the socom in ANY weather,one time at Bigfoot it was so cold the mags had frost on them and I was still getting kills! I would recomend staying with green gas mostly because this pistol is cheap to run and you can easily carry a can of green gas in a pouch. Also,dont mod the lam unit bulb,In my original lam unit I swapped out the white led for a blue one and was virtually undetectable by other players until it was to late. The lam unit is designed to give off low light to help you get where you are going without totally ruining your night vision or give you away. My two cents.

March 31st, 2010, 03:35	#54
shiftline Trader rating Join Date: Sep 2004	Good call withthe lam, maybe i wont swap in a super bright flash light! As for mags im only getting one leaky one with the gun which i will try and fix, the holster i ordered holds 2 spares, so it would be nice to order them.. just trying to find some propane ready mags so i dont have to hack/mod brand new ones __________________ Optical Illusions

March 31st, 2010, 03:41	#55
shiftline Trader rating Join Date: Sep 2004	Good call with the lam, maybe i wont swap in a super bright flash light! As for mags im only getting one leaky one with the gun which i will try and fix, the holster i ordered holds 2 spares, so it would be nice to order them.. just trying to find some propane ready mags so i dont have to hack/mod brand new ones __________________ Optical Illusions

Good NBB Guns

Airsoft Guns Discussion