|
|
|
June 1st, 2009, 21:07
|
#31 | |
|
Shoot me a PM, maybe we can work something out
__________________
Quote:
Chinese proverb
|
|
|
|
|
June 4th, 2009, 13:50
|
#32 |
|
aka SNK or Shaniqua
|
PP Magwell works fine with genuine Magpull Airsoft PMAGs - well, they don't slide in smoothly and you can't just push it in and get it to lock right away. You need to press the mag release button first and hold it down while pushing the PMAG in, then release the button and then it will lock and be quite tight and feed perfectly (as with all G36 adapters, since the feed lip is so long, you will have about 10 bbs that don't feed properly at the end).
Haven't tested on STAR Greenline PMAGs yet. Will next week.
__________________
SHÖCK 
|
|
|
|
|
June 14th, 2009, 19:38
|
#33 | |
|
**UPDATE**
Skirmished with it at Wasaga today. I found that if I don't put the retaining nut on the magwell pin, it feeds fine. I actually didn't have a single misfeed all day. Of course, this isn't a perminant solution (although the pin is friction fit enough so it shouldn't be an issue), but seems to work for now. I'm not sure if the problem is that the hole on the magwell is off spec, or my pin is off centre, or what. All I know is that if I put the retaining nut on it moves the magwell about 0.5mm, which causes it to stop feeding.
__________________
 Quote:
|
|
|
|
|
|
November 14th, 2009, 09:19
|
#34 |
|
G36 to m4 mag adapter
Classic army is making a m4 magwell for G36. part# A279P made of fiber reinforced polymer like CA and KWA G36 body.
I ordered one from scope and laser with the PMAGs. I will update when tested. ***UPDATE*** Classic army adapter work fine but modification needed to fit on KWA body. I had to slightly mill some plastic on the adapter because of interference with the gearbox. Works fine with magpull PTS mag.
__________________
Last edited by Warlock; April 6th, 2010 at 14:02.. Reason: mistake |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
