Classic Army - P90 Sportline Series

[CJay]

That's assuming u get it sent to an address u can't change. Just out of habit I get it sent to local rented post boxes for trackin an insurance reasons and always have but that's off topic ;P. Look the point is I'm from a country where airsoft is legal so I didn't know. Al I'm saying is now I do an I ain't gonna order again just in case but like I said I got lucky twice so it can be done for way cheaper that way if u wanna risk it. I'm not arguing about how sensible it is LOL. Hell I obviously don't think it is or I'd still be doing it haha.

[cbcsteve]

Ont guys tend to be more stringent on rules and regs cause there is so much that can go wrong.

Aside from that a big not to all who have a CA P90 to definitely replace your hop up rubber as The TM P90 is supposedly to have a very legendary hopup mechanism above the rest and the CA P90 is the clone of that wonderful hop up unit.

I took it apart and inspected it and from what I can tell its quite close to the TM P90 hop up unit except the fitment on that piece that holds the wheel in place seems to be a fraction of a mm off. But that I do not think will affect it much

ALL CA P90 users

CHANGE THAT HOP UP Rubber

Why:
Its way too hard and it does not give much hop even when placed on maximum while I remember the TM P90 gave a lot of hop up. So I believe changing that hop up rubber can get you closer the the TM P90 one.

Final Comments
I miss my TM P90 but the CA P90 being worth half and it is not a bad gun thats for sure. A few minor issues but can be fixed. But I would say not the best out of the box gun like the TM P90 would be

Source: On why the TM P90 is a legendary hop up unit
http://www.arniesairsoft.co.uk/?filn...p90_review.htm

[cbcsteve]

Originally Posted by Styrak

You probably just need a sector clip to delay the nozzle. The BB's dont have enough time to get into the hopup chamber before another cycle happens. This occurs with more powerful batteries and higher rates of fire.

Strangely the TM P90 did not have that problem even on higher battery power. And I heard there was a similar problem but that person re-worked the mechbox but it only partially solved the problem.

Sector Clip, first time hearing that, can you explain more?

[Styrak]

Originally Posted by cbcsteve

Sector Clip, first time hearing that, can you explain more?

Can't say much more than I already did. It delays the tappet plate which in turn delays the nozzle, giving more time per cycle for the BB to enter the hopup chamber. I have one installed on my AUG since even at a normal ROF it seemed to be only shooting every second shot. It feeds perfectly now.

[Crunchmeister]

Originally Posted by Styrak

Can't say much more than I already did. It delays the tappet plate which in turn delays the nozzle, giving more time per cycle for the BB to enter the hopup chamber.

Actually, the sector clip makes the tappet plate engage sooner than it would without it.

[Styrak]

Originally Posted by Crunchmeister

Actually, the sector clip makes the tappet plate engage sooner than it would without it.

Delays the tappet plate moving forward

[Crunchmeister]

Very true, but it's the quicker backwards action when it engages the tappet plate that allows more reliable feeding at high speed, not the release.

[cbcsteve]

Quicker backwards action eh? How would I attain the quicker backwards action would it be greasing?

Aside from that my next upgrade would be to add on a softer hop up rubber and put on a tightbore P90 barrel as I read that the TM P90 can hit accurately at 45m (147 feet) now if this CA P90 is somewhat of a good clone hopefully I can reach that range without having to use a longer barrel.

This gun shoots at 330 FPS +2 and thats good enough for me, I don't think I will be upgrading the spring, even outdoors I can still peg people with that using 0.28g's

[Styrak]

Originally Posted by cbcsteve

Quicker backwards action eh? How would I attain the quicker backwards action would it be greasing?

Only a sector clip can do that.

[cbcsteve]

Originally Posted by Styrak

Only a sector clip can do that.

Yes you stated that earlier, thanks and I noted that for alternative 1

I was looking for Crunchmeister would say as he seems to have another alternative as well

[Styrak]

He was talking about a sector clip as well.

[HeadlessChicken]

Anyone having feeding issues with the hi cap mag that came with the gun? I haven't read through the whole thread, I don't want to use up whats left on my internet minutes just yet, still got a couple more days for vacation. Before leaving, I did some plinking with it at a friend's house and found it wouldn't fire numerous times even after whining the mag filled half way.

[Styrak]

P90 hicaps are known to be crap.

[CJay]

Agreed. P90 hicaps are known to be terrible. Stick to low caps

[CJay]

Agreed. P90 hicaps are known to be terrible. Stick to low caps