Show off your PDW!

Reckless · December 23rd, 2011, 01:10

mine playing around before it goes under the knife...

the torch grip is actually a Trigger happy grenade launcher

it's getting cut up and tucked right up to the magwell

the battery box is going bye bye, rear wired with the battery in a paracord Faux Fullstock .. and a MP5 swordfish strike front end and rail moulded into the upper ... oh and an ergo fullsize grip ..

Kingsix · January 1st, 2012, 21:39

Hawkeye_CJMC · January 2nd, 2012, 21:36

Here's one of my WE open bolt KAC PDW projects. I have another black one that I'm trying to figure how I'm going to set it up...

MaciekA · February 10th, 2012, 22:41

Already posted this elsewhere, but this is the correct thread for this post.

My DBoys / VFC PDW "Hybrid" "Kommando" edition.

- Started life as a DBoys PDW.
- Got PDW gearbox direct from VFC, shimmed and installed it into the DBoys body.
- Removed some stuff from the handguard and installed 1000mAh LiPo inside the gun.
- Removed the stock.
- Installed the G&P M170 Devil Jet motor (there are better options but I was in a hurry and I really like the motor hookups on G&P motors).
- AWS Raptor MOSFET is next on the list.

This gun is pretty scrappy, but extremely lightweight and fun to use.

p.s. these are not my hands, they're my wife's (she plays also).

T@NK · February 11th, 2012, 01:08

Quote:

Originally Posted by Kingsix

it'll be even better if you can shorten the forgrip and remove the folding stock.

Coresair · February 11th, 2012, 07:31

Quote:

Originally Posted by T@NK

it'll be even better if you can shorten the forgrip and remove the folding stock.

Then it change brackets and belong in the pistol thread!

Kingsix · February 11th, 2012, 19:06

Quote:

Originally Posted by Coresair

Then it change brackets and belong in the pistol thread!

DING DING DING We have a winner!

N_Force · February 21st, 2012, 00:19

Basic WE PDW open bolt

Danther · February 21st, 2012, 12:14

Quick question, why do you guys use M4 mags in you KAC PDWs? And that suppressor has the wrong caliber on it.

Fuzzy · February 21st, 2012, 13:11

Quote:

Originally Posted by Danther

Quick question, why do you guys use M4 mags in you KAC PDWs? And that suppressor has the wrong caliber on it.

Probably because they fit. Gbbr mags are expensive. If I already have 10 mags for my WE M4, I'm surely not going to spend another $400 to buy 10 pdw mags.

coach · February 21st, 2012, 13:11

Quote:

Originally Posted by Danther

Quick question, why do you guys use M4 mags in you KAC PDWs? And that suppressor has the wrong caliber on it.

For me it's cause the WE PDW mags suck.

Strelok · March 13th, 2012, 14:56

New toy. :>

Kable · March 13th, 2012, 17:05

AEG or GBB? What Brand?

Here's how mine looks right now. Not sure if i wanna sell it anymore... Not a SEALs gun but its so damn nice...

faithless · March 13th, 2012, 17:28

it is a WE, so gbbr

nice trade the PDW

Strelok · March 13th, 2012, 19:34

Thanks! Guns shooting wonderfully, just gotta get stuff in for it

. Anyone know if there are stiffer return springs for the PDW?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 1st, 2012, 21:39	#32
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	__________________

February 10th, 2012, 22:41	#34
MaciekA Trader rating Join Date: Jun 2011 Location: Portland, Oregon, USA	Already posted this elsewhere, but this is the correct thread for this post. My DBoys / VFC PDW "Hybrid" "Kommando" edition. - Started life as a DBoys PDW. - Got PDW gearbox direct from VFC, shimmed and installed it into the DBoys body. - Removed some stuff from the handguard and installed 1000mAh LiPo inside the gun. - Removed the stock. - Installed the G&P M170 Devil Jet motor (there are better options but I was in a hurry and I really like the motor hookups on G&P motors). - AWS Raptor MOSFET is next on the list. This gun is pretty scrappy, but extremely lightweight and fun to use. p.s. these are not my hands, they're my wife's (she plays also). __________________ "Mah check" Now you know

February 21st, 2012, 00:19	#38
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Basic WE PDW open bolt __________________ aka Uncle Last edited by N_Force; February 21st, 2012 at 00:22..

February 21st, 2012, 12:14	#39
Danther Trader rating Join Date: Sep 2011 Location: St Lambert, QC	Quick question, why do you guys use M4 mags in you KAC PDWs? And that suppressor has the wrong caliber on it.

March 13th, 2012, 14:56	#42
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	New toy. :>

March 13th, 2012, 17:28	#44
faithless Trader rating Join Date: Apr 2010 Location: North York/Bruce County, ON	it is a WE, so gbbr nice trade the PDW

March 13th, 2012, 19:34	#45
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	Thanks! Guns shooting wonderfully, just gotta get stuff in for it . Anyone know if there are stiffer return springs for the PDW?

Show off your PDW!

Airsoft Media