Wifey wants a...PINK MINIGUN?

Killbucket · August 25th, 2009, 23:46

Thank you, all.

...more on this tomorrow!

Ayashifx55 · August 26th, 2009, 00:25

Holyy. How many moneyyy

Killbucket · August 26th, 2009, 08:41

It's treatable, because it was found EARLY. And that's the end of the PSA.
Thank you all for your sympathy!

There is less than $50 in what you've seen so far. The REAL cost is in the development of parts that all work together. This one was made to look simple, by all the previous builds you didn't see.

I've put together over 75 of these!

The drive motor/transmission, from what else? A Harbor freight cordless drill!
The drive roller is made from a bolt and Oatey gray putty stick. I put a blob on the bolt, let it set, and turned it on the lathe.

The completed, wired up grip. Both the hat switch and the trigger have to be pressed for firing, so either finger can be used for firing: thumb or index. Together, they are the "safety" for this gun, there will be NO on/off toggle.

The ammodrive is similar to the one on the T600:

Inset: M4 hicap with modified RC servo (tutorial here) http://www.air-sharp.com/magmod.html and chutes made from 3mm ABS sheet stock.

about how the chute will mount.

Off to the CNC to make the drive motor mounts.

FINISHED!!!!

skalnok · August 26th, 2009, 15:04

i can just see people running away running from your wife yelling

"RUN FROM THE HUBBA BUBBA REP!!!!!"

Killbucket · August 26th, 2009, 15:47

Hilarious! She's fearsome with a springer USP, I'm kind of hesitant to give her 10,000 rounds, and the batteries to fire all of them without stopping!
and..
Please don't go buy NEW stuff to do this! This kind of project gets exponentially more fun, the more you can shoestring it.

That's the whole methodology behind my work.

Check it out: His n Hers!

Gonna put HD parts in the pink minigun.

Side Note: Why not just do one, HUGE colossal "Killbucket" thread?
The thread gets a bit long, and readers wanting particular projects start getting lost:

http://www.355nation.net/forum/off-t...otor-more.html
11,248 reads since January 5th, 2009 -that's GOOD.
FIFTY-EIGHT PAGES -that's bad.

Bissa · August 26th, 2009, 17:09

is that pile of guns usable? or if not are they at least salvageable?

Killbucket · August 26th, 2009, 17:11

Quote:

Originally Posted by Bissa

is that pile of guns usable? or if not are they at least salvageable?

SOLD. Along with the dozens that followed. I make them in my sleep still to this day...

Biz! Fog! Mr. Headcrab! Dan! Big Al! FrenchDictionary! MaoriWarrior! Akcrazy!
http://groups.google.com/group/killb...-minions?hl=en
Join up now, seniority's gonna count!

Kwokwai · August 26th, 2009, 18:15

The only thing missing are the Hello Kitty stickers. I like.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 25th, 2009, 23:46	#16
Killbucket Trader rating Join Date: Jan 2007 Location: Citrus Heights, CA	Thank you, all. ...more on this tomorrow!

August 26th, 2009, 00:25	#17
Ayashifx55 Trader rating Join Date: Jan 2008 Location: Quebec, Montreal	Holyy. How many moneyyy

August 26th, 2009, 08:41	#18
Killbucket Trader rating Join Date: Jan 2007 Location: Citrus Heights, CA	It's treatable, because it was found EARLY. And that's the end of the PSA. Thank you all for your sympathy! There is less than $50 in what you've seen so far. The REAL cost is in the development of parts that all work together. This one was made to look simple, by all the previous builds you didn't see. I've put together over 75 of these! The drive motor/transmission, from what else? A Harbor freight cordless drill! The drive roller is made from a bolt and Oatey gray putty stick. I put a blob on the bolt, let it set, and turned it on the lathe. The completed, wired up grip. Both the hat switch and the trigger have to be pressed for firing, so either finger can be used for firing: thumb or index. Together, they are the "safety" for this gun, there will be NO on/off toggle. The ammodrive is similar to the one on the T600: Inset: M4 hicap with modified RC servo (tutorial here) http://www.air-sharp.com/magmod.html and chutes made from 3mm ABS sheet stock. about how the chute will mount. Off to the CNC to make the drive motor mounts. FINISHED!!!!

August 26th, 2009, 15:47	#20
Killbucket Trader rating Join Date: Jan 2007 Location: Citrus Heights, CA	Hilarious! She's fearsome with a springer USP, I'm kind of hesitant to give her 10,000 rounds, and the batteries to fire all of them without stopping! and.. Please don't go buy NEW stuff to do this! This kind of project gets exponentially more fun, the more you can shoestring it. That's the whole methodology behind my work. Check it out: His n Hers! Gonna put HD parts in the pink minigun. Side Note: Why not just do one, HUGE colossal "Killbucket" thread? The thread gets a bit long, and readers wanting particular projects start getting lost: http://www.355nation.net/forum/off-t...otor-more.html 11,248 reads since January 5th, 2009 -that's GOOD. FIFTY-EIGHT PAGES -that's bad.

August 26th, 2009, 17:09	#21
Bissa Trader rating Join Date: Mar 2007 Location: Kelowna, BC	is that pile of guns usable? or if not are they at least salvageable?

August 26th, 2009, 18:15	#23
Kwokwai Trader rating Join Date: Dec 2001 Location: Mississauga, ON	The only thing missing are the Hello Kitty stickers. I like.

Wifey wants a...PINK MINIGUN?

Upgrades & Modifications