Accuracy problem

CDN_Stalker · January 27th, 2009, 00:05

Even 0.20g Bbs suck ass at 30ft. Trust me on that one, there is a reason they ae only used for chronying and CQB within a few feet. The rest of the time you should use 0.25g indoors where ranges can be past 50ft, and 0.25g to 0.28g when playing outdoor games. I don't even use less than 0.28g BBs in my GBBs for a VERY good reason!

Donster · January 27th, 2009, 00:10

increase BB weight, clean barrel, get a new hop-up rubber. and if that doesn't work, do everything i just listed, except instead of cleaning the barrel, get a new barrel. Just cause it came with a tightbore, doesn't mean its a good one. Go grab a prometheus 6.03 and you are golden. also check the fps consistency with a chrono.

lemegacool · January 27th, 2009, 00:13

what cdn_stalker said is veryyyyyy true! i shot my ak last friday with .20 and was getting horrible accuracy at about 70-80 ft, i tried a mag of bastards .25 and BAM! HUGE improvement! i'll dry out my .20 bags and only buy .25 + in the future!

Erennert · January 27th, 2009, 00:32

OK, will do. Thanks everyone

CDN_Stalker · January 27th, 2009, 00:37

Quote:

Originally Posted by lemegacool

what cdn_stalker said is veryyyyyy true!

Is the reason why even God wonders WTF happens when a BB comes out of nowhere.

But seriously, heavy BBs equals tighter groups any day. I shoot at 30ft indoors more than any other range; using 0.30g BBs I can get 1" groups with my KSC MK23 most times, andit has a tightbore, but it's a PISTOL! And can get easy 3" groups with my G19 using 0.28g BBs as well.

lemegacool · January 27th, 2009, 00:52

Quote:

Originally Posted by CDN_Stalker

But seriously, heavy BBs equals tighter groups any day. I shoot at 30ft indoors more than any other range; using 0.30g BBs I can get 1" groups with my KSC MK23 most times, andit has a tightbore, but it's a PISTOL! And can get easy 3" groups with my G19 using 0.28g BBs as well.

hmmmm! i thought theses result was because YOU was shooting the pistol

i have a stock jg bar-10 gspec (303mm barrel) and i get impressive accuracy with .30 (can't wait for my pdi 6.01 450mm to arrive!)

Erennert · January 27th, 2009, 01:17

Haha, when the time comes, can anyone recommend a nice TB that fits my 74u? Preferably without a silencer.

lemegacool · January 27th, 2009, 01:36

dont know about the lenght, just mesure it and for the brand prometheus are great, but if you have the dough go for the pdi one's

Ktown Militia · January 27th, 2009, 01:38

this one should do.

http://www.airsoftparts.ca/store2/in...roducts_id=460

Erennert · January 27th, 2009, 01:39

Hmm, length, i have no idea either... and I just know, if i tried to take my gun apart, it would never find itself back, unless i took it to the docs. Even for a simple installation, i would defiantly go to the Docs anyhow, just for the cleaning, re shim, installation all in one sitting. Also, I'll defiantly wait before buying the TB, I'll try my .28's im buying. Also, i need to find out the velocity of my gun on .28's. Any ideas people? its 490 FPS on the box(.12g) And from pop can test, I'd say 360-380 with .20g. I really want to find out what it would be with .28.

Ktown Militia · January 27th, 2009, 01:39

on another note i confirm what CDN has posted. I was using .20g and went to .25 and there was a huge difference.

Erennert · January 27th, 2009, 01:42

You think it could have been the BB's? They were Crosman .20g, which i know i should never use in a higher end AEG, but they were seamless, and i needed to try it out. I will be purchasing my TLP charger and a couple of bags of .28's or .25 off BBbastard.

Ktown Militia · January 27th, 2009, 01:44

Quote:

Originally Posted by Erennert

You think it could have been the BB's? They were Crosman .20g, which i know i should never use in a higher end AEG, but they were seamless, and i needed to try it out. I will be purchasing my TLP charger and a couple of bags of .28's or .25 off BBbastard.

could've been... maybe. But i've never heard anything good about crossman bbs.... Give the new higher grade bb's a chance and let us know how it goes.

Erennert · January 27th, 2009, 01:46

Sure thing Ktown, but i think it may be a few weeks, or less, i wanna go check out DS before i order over the internet, to avoid shipping, ect. Since it's only around 1 hour away, I'd figure it would save me time if they carry them.

Ktown Militia · January 27th, 2009, 01:49

Quote:

Originally Posted by Erennert

Sure thing Ktown, but i think it may be a few weeks, or less, i wanna go check out DS before i order over the internet, to avoid shipping, ect. Since it's only around 1 hour away, I'd figure it would save me time if they carry them.

DS?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 27th, 2009, 00:05	#16
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Even 0.20g Bbs suck ass at 30ft. Trust me on that one, there is a reason they ae only used for chronying and CQB within a few feet. The rest of the time you should use 0.25g indoors where ranges can be past 50ft, and 0.25g to 0.28g when playing outdoor games. I don't even use less than 0.28g BBs in my GBBs for a VERY good reason! __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

January 27th, 2009, 00:13	#18
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	what cdn_stalker said is veryyyyyy true! i shot my ak last friday with .20 and was getting horrible accuracy at about 70-80 ft, i tried a mag of bastards .25 and BAM! HUGE improvement! i'll dry out my .20 bags and only buy .25 + in the future! __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

January 27th, 2009, 01:36	#23
lemegacool Trader rating Join Date: Aug 2008 Location: notre dame des prairies /quebec	dont know about the lenght, just mesure it and for the brand prometheus are great, but if you have the dough go for the pdi one's __________________ member of fire team NOM. my other regular forum: www.toyotanation.com / gen3,gen4 camry

January 27th, 2009, 00:10	#17
Donster Trader rating Join Date: Jul 2007 Location: GTA	increase BB weight, clean barrel, get a new hop-up rubber. and if that doesn't work, do everything i just listed, except instead of cleaning the barrel, get a new barrel. Just cause it came with a tightbore, doesn't mean its a good one. Go grab a prometheus 6.03 and you are golden. also check the fps consistency with a chrono.

January 27th, 2009, 01:38	#24
Ktown Militia Trader rating Join Date: Mar 2008 Location: Kelowna BC	this one should do. http://www.airsoftparts.ca/store2/in...roducts_id=460 __________________

January 27th, 2009, 01:39	#26
Ktown Militia Trader rating Join Date: Mar 2008 Location: Kelowna BC	on another note i confirm what CDN has posted. I was using .20g and went to .25 and there was a huge difference. __________________

Accuracy problem

Doctor's Corner