Mach 1 Airsoft - G&G GR16 R4 Commando In-Depth Review

[ShadowNet]

Yeah, I couldn't get mine off. Took out the tiny hex screw and it wouldn't budge no matter how hard I tried. I have no Idea how to get it off. Won't putting it next to a lighter melt the paint too?

[bobotea]

Originally Posted by ShadowNet

Yeah, I couldn't get mine off. Took out the tiny hex screw and it wouldn't budge no matter how hard I tried. I have no Idea how to get it off. Won't putting it next to a lighter melt the paint too?

Nah im pretty sure its blued onto the metal. Also split your recievers before you do this because i have heard some people have cracked theirs trying.

[ShadowNet]

Originally Posted by bobotea

Nah im pretty sure its blued onto the metal. Also split your recievers before you do this because i have heard some people have cracked theirs trying.

I got mine off today. Wasn't really glued - just really freakin tight. Used the wrench that came with it.

[bobotea]

Originally Posted by ShadowNet

I got mine off today. Wasn't really glued - just really freakin tight. Used the wrench that came with it.

ah i see sweet thanks.

[idontknow5465]

what mags from Mach1Airsoft fit the G&G GR16 R4 COMMANDO the best

[ShadowNet]

MAG M16 Midcaps are awesome

Originally Posted by idontknow5465

what mags from Mach1Airsoft fit the G&G GR16 R4 COMMANDO the best

[sopmod]

yp. their mags are good. I prefer metal mags though, like KA, TM. G&P's jam a lot.

[Karnage]

Dboys and Jing Gong Metal mags work flawlessly with the G&Gs at a fraction of the price, the plastic C8s however don't fit properly.

[johjoh]

I have the GR16A3 (m16 version) of this gun its works pretty good i dint do accuracy tests... since its winter and -30 and over this week lol but it should be accurate since its an m16 with a long barrel has a nice rate of fire with stock battery (same as one in review) its same internals im sure and as for the flash hider mhmm lol mine is hard to get off too but i wont force it its fine for now

and btw hi Karnage, its Jocelyn lol

[marcwhite]

correct me if im wrong but I believe that mach1 has the G&G ones not the combat machies(aka.sportsline)?

[ShadowNet]

Originally Posted by marcwhite

correct me if im wrong but I believe that mach1 has the G&G ones not the combat machies(aka.sportsline)?

Mach1's G&G models (other than "Light" models) are exactly the same as G&G's full metal lines. Strangely, the lower clear receiver has the decal "Mfg. by Combat Machine" on it though.

[sgt-olivier]

how did you have painted the clear lower receiver without erasing the marking?!

[KNIVEZS]

Originally Posted by sgt-olivier

how did you have painted the clear lower receiver without erasing the marking?!

http://www.airsoftcanada.com/showthr...ghlight=crayon
he probably filled the trademarks with crayon

[sgt-olivier]

Originally Posted by KNIVEZS

http://www.airsoftcanada.com/showthr...ghlight=crayon
he probably filled the trademarks with crayon

is it right shadownet? because if yes, ur a pro! good paintjob:fro:

[ShadowNet]

Originally Posted by sgt-olivier

how did you have painted the clear lower receiver without erasing the marking?!

haha, the trades are actually decals, so I couldn't fill it in with a crayon. What I did was disassemble the gun and take out the lower receiver. I then used masking tape to cover the trades. I sprayed the receiver with krylon camo paint, and then i painted the inside of the receiver's magwell where the trades were. With flash photography, the area where the trades are is noticeably shinier, but otherwise, it is barely noticeable.