|
|
|
August 20th, 2011, 19:22
|
#16 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
The ASCU and all LiPo ready SW-COMPs cut off power to your motor when it detects low voltage so you can't fire your gun, but it can't turn itself off, so it keeps draining power.
It's advertised on the unconventional airsoft triggermasters that you shouldn't leave batteries plugged in due to their constant drain, but I don't know if anyone else gives you that critical piece of info. |
|
|
|
August 20th, 2011, 20:35
|
#17 | |
|
It all makes senses
I hope others will read that info one way or another then
__________________
Quote:
|
|
|
|
|
|
August 21st, 2011, 17:19
|
#18 |
|
Curious Question.. I have a LIPo and it's a 20C 7.4V 1200 mAh. I have a B6D charger but i have never charged a lipo before.. I know there is balancing.. Just curious if anyone can help me out.. Thanx
 do i set the amps to 1.2A and the V to 7.4V
Last edited by BobbyDangerous; August 21st, 2011 at 17:21.. |
|
|
|
|
August 21st, 2011, 18:29
|
#19 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Set is to 2S (2 cell) or 7.4v, whichever your charger goes by
Set it to 1.2A absolute maximum, although it doesn't hurt your batteries at all to charge at a lower amperage Straight charging generally doesn't balance the pack, it just charges it until one of the cells reaches 4.2v. Balancing ensures every cell is at 4.2v. However you only need to balance the battery every 10 charges or so from what I hear. |
|
|
|
|
August 21st, 2011, 19:18
|
#20 |
|
|
K awesome.. Thanx man
|
|
|
|
|
August 22nd, 2011, 08:45
|
#21 |
|
|
I can't believe how fast it charged and no heat at all. Amazing. With the B6D charger it charged in 30 min
|
|
|
|
|
August 24th, 2011, 10:45
|
#22 |
|
11,1 25C 5000 mAh LiPo
I`m not sure if this is the right thread to ask this but do you think that 11,1v 25C 5000 mAh Lipo would be a little overkill to a G36c with highspeed gears (SHS 16:1) and a SHS Ultra High Torque motor and a M120 spring (400fps) ? I wanna hear your opinions about this.
|
|
|
|
|
|
August 24th, 2011, 14:43
|
#23 |
|
a.k.a. wingmantank
|
Not a little overkill, it's a freaking Nuke.
__________________
|
|
|
|
|
August 25th, 2011, 04:51
|
#24 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
Your gonna blow it up. My 249 at 380fps with an EF1300 motor, shoots 1500rpm on an 11.1v lipo and it's got TRIPLE TORQUE gears.
|
|
|
|
|
August 25th, 2011, 12:27
|
#25 |
|
Well my friend has been running his high speed mp5 with 14,8v lipo and it has a rof about 40 and same parts have holded up for a year now
|
|
|
|
|
|
August 25th, 2011, 16:19
|
#26 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
How does it even feed BBs that fast?
|
|
|
|
|
August 25th, 2011, 16:56
|
#27 | |
|
aka coachster
|
Quote:
|
|
|
|
|
|
September 11th, 2011, 07:56
|
#28 |
|
How do u figure out how many cells there is in a lipo battery? i.e. 11.1v 1300mAh 20c <- which of these indicate the number of cells.
|
|
|
|
|
|
September 11th, 2011, 08:18
|
#29 | |
|
Quote:
2 cells are 7.4v, 3 cells are 11.1v, 4 cells are 14.8v. Your example is actually missing a bit of info, but it is ok because the voltage can be used to calculate the amount of cells. The missing information is the "S" number. "S" is the number of cells. Your above example battery would also be known as: 11.1v 1300MaH 3S 20C. |
|
|
|
|
|
September 13th, 2011, 18:55
|
#30 |
|
formerly aBseNtceLL
|
Just to add to the charging portion, it's actually a good idea to balance charge LiPo batteries every time as the cells do not necessarily discharge or charge at the same rate.
|
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
