|
|
|
April 25th, 2012, 14:08
|
#16 | |
|
I gamed mine once too.
But bought is broken. Replacement parts aside the nozzle are HARD to find. I got it with 7 mags, so I don't know about availability issues. KSC and KWA mags (new ones, the TMP mags don't work) are compatible. It is basically the same gun, one has trades. I bought the low power bolt because it was easier to just buy the whole thing than trace the blow back unit alone. The difference is only the floating valve in it. Stock is rocket-shaped, low power is a cylinder. It takes 30 seconds and a flat screw driver to swap the bolts, really easy. Gaz in the eye is still an issue, I will do the route mod (you fill the gap at the rear and make a second escape path for the gaz) and maybe install a cheek rest since I use it with a RDS.
__________________
Quote:
|
|
|
|
|
April 25th, 2012, 23:27
|
#17 |
|
k well im going to be taking care of all those things people have previously mentioned see what happens always pull the bolt back for the mag etc
|
|
|
|
|
|
April 26th, 2012, 00:15
|
#18 |
|
I had one. It's a piece of shit. However that is my experience. They appear to be hit and miss. Look on the KWA forums. You'll see a shit ton of complaints about the gun and KWA has done fuck all.
|
|
|
|
|
April 26th, 2012, 00:38
|
#19 | |
|
Quote:
__________________
H&K G36c (KWA) / Glock 18c (TM) / Kimber LAPD SWAT Custom (TM) / Mossberg M500 (ACM) 
|
|
|
|
|
|
April 26th, 2012, 00:51
|
#20 | |
|
|
Yes, was for the M11, but if you overload your mags, you can damage the loading nozzle on the MP9 as well. You won't crush the bolt however like the M11.
Mine has been awesome so far. I gamed it once but fired well over 2k BBs with the new bolt and there is no wear anywhere. Just remember to keep it lubed properly (more like a pistol than a GBBR though... the upper receiver is not used to guide anything, so no need to grease the outside of the bolt... it's just like a slide from a pistol.
__________________
Quote:
|
|
|
|
|
|
April 30th, 2012, 04:30
|
#21 |
|
Anyone know if these issues have been fixed?
|
|
|
|
|
|
May 4th, 2012, 13:54
|
#22 |
|
Does anyone know where to find mags for this gun because everywhere I look they are sold out or too expensive.
|
|
|
|
|
|
May 4th, 2012, 13:57
|
#23 | |
|
Quote:
__________________
 Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
|
May 4th, 2012, 14:10
|
#24 |
|
So far this is the best I could find in Canada.
http://www.ventureairsoft.ca/item.ph...aa0e7698dc7844 But he does not know when he will have more. |
|
|
|
|
|
May 4th, 2012, 14:40
|
#25 |
|
Anyone know if the KSC MP9 magazines will work with the KWA?
I am aware that the older KSC magazine are not compatible with the KWA MP9. However, it is my understanding that the newer KSC System 7 magazines are compatible with the KWA MP9. Can anyone confirm this? |
|
|
|
|
May 4th, 2012, 15:01
|
#26 |
|
|
Theyll work fine. Hitman, you dont need to buy mags in canada if theres a better price internationally, just make sure you account for shipping
__________________
Not for glory, nor riches, nor honours, but for freedom alone, which no good man gives up except with his life. |
|
|
|
|
May 4th, 2012, 15:46
|
#27 |
|
2tall2brawl
|
KWA proshop has mags and will ship international. Give em a call.
|
|
|
|
|
May 8th, 2012, 19:13
|
#28 |
|
Think I'll order from them considering I need the low power bolt too
|
|
|
|
|
|
May 8th, 2012, 19:49
|
#29 | |
|
Quote:
Also as a side note, I tested mine on a couple different BB weights and it can shoot around 330fps with .25g and 350fps with .28g. On a general GBB note, being used to AEGs it could seem to be an easy mistake to chrony with a light BB and be within limits but then game a heavier weight and be way over. |
|
|
|
|
|
May 9th, 2012, 09:05
|
#30 |
|
|
FYI, I phoned in to order a MP9 Low Power Bolt through KWA USA directly. They charged me $15.00 USD for shipping. They shipped via USPS but the tracking # didn't seem to work. IIRC though it arrived in under 2 weeks.
My advice is to call them to confirm if they have the parts you want in stock. The bolt I ordered was out of stock when I first called them about 2 or 3 weeks prior, I only placed the order once they confirmed that they had restocked. |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
