March 4th, 2011, 03:54 | #16 | ||
ASC's Whiny Bitch
|
Quote:
Pay attention here and you may learn something for once in your life. Let's say there is one "outer" barrel (that's the big barrel that looks like the one on a real gun) inside that, there will be three "inner" barrels (they're small and usually look like some kind of brass, these don't exist on a real gun) the shell will load one BB into each of these per movement of the action, although more than one movement of the action without firing the gun will damage it. This is what's meant by "Multi Barrel action", it has nothing to do with "Double barrel shotguns"
__________________
Quote:
Certified Level 3.1415926 Orbital Weapons platform Certified |
||
March 4th, 2011, 04:01 | #17 | |
Quote:
He never said anything about double barrel shotguns or any of that jazz. |
||
March 4th, 2011, 04:11 | #18 |
Iskaryot
|
Ok I did a bit of research and 3 brands caught my eye
TSD M3 DE M56 UTG M3 Apparently, the TSD M3 has a metal outerbarrel and comes with more freebies. Other than that, it's pretty much the same as the other two. TM shotguns seems to be better, but are more expensive by comparison. Do you guys have any other inputs or other recommendations? And please don't argue in this post, I never said anything about double barreled shotguns.
__________________
|
March 4th, 2011, 04:32 | #19 |
God damn that Kingsix^H^H^H^H^H^H^H Iskaryot guy.... such a noob
If you're looking for something for gun I highly recommend the Canadian Tire Tri-Shot TM clone (S34P). They come on sale sometimes, just never pay full price for one. They sometimes break but it's not a terribly large amount of money especially if you're only using it for CQB a few times a year. Other than that TM has an M3 obviously since there are clones of it out on the market, and I can't really say for certain about the other multi barrel shotguns but those are probably the ones to look out for. If you're wanting a shotgun for a primary then may I suggest the gas ones like the Marushin or something (warning it'll probably be pretty expensive).
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
March 4th, 2011, 04:40 | #20 | |
Iskaryot
|
Quote:
Canadian tire shotgun... the clearsoft one? I don't really trust Canadian Tire airsoft guns but I'll keep an eye out. And no, not primary. Just a cheap one I can play with till T88 or KWA TT-33 comes out. After that, I'll just lend it to friends if I invite them to the airsoft games. Or I could mod it for the lulz.
__________________
|
|
March 4th, 2011, 07:29 | #21 | |
Quote:
Bought my second one last week for 72$. Great price, even for crapsoft. |
||
March 4th, 2011, 09:36 | #22 |
Najohn
|
Don't you have to be OVER 18 to purchase guns at the convention?
Last edited by Short Round; March 4th, 2011 at 09:39.. |
March 4th, 2011, 13:31 | #23 |
Iskaryot
|
I am over 18? What, you think I'm some random kidiot just cause I'm not AV'd yet? Maybe getting AV'd is what I'll be doing at the convention
__________________
|
March 4th, 2011, 13:33 | #24 | |
a.k.a. Phoneguy
|
Are you asking us?
You'll be able to run into a few age verifiers at the convention if you'd like. Check out who's going to be there on the Toronto Convention thread. Cheers, FACE
__________________
Quote:
|
|
March 4th, 2011, 13:36 | #25 |
Lol it's cause apparently people confuse you with Kingsix all the time
Anyways yeah, the clearsoft S34P is the one you want. At $69.99 on sale it's a decent buy and great if you "salt and pepper" your BB's with a mix of .20's .25's and .28's so that you get a good random spread when you're firing (if that's your thing). But again be careful, it's fragile and the screws can easily strip and you can crack the body. A coat of Krylon matte black and you're good to go pretty much. Also, shells may be ordered from outside the country, since it's a TM clone you can use TM shells I think they go for like $14 USD for like a 6 pack and add in shipping and stuff and I think you're sitting at around $20-25 for a pack of shotgun shells.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
March 4th, 2011, 13:42 | #26 | |
Iskaryot
|
Quote:
I think I'll just ask around once I'm there :P
__________________
|
|
March 4th, 2011, 13:43 | #27 | |
Quote:
Now I'm very interested in these TSD Shotguns, metal outer barrel VS plastic shotgun outer barrel Crossman! :O I hit a wall pretty badly and the front of my shotgun chipped off, purely cosmetic but looks fugly. |
||
March 4th, 2011, 14:16 | #28 | |
Quote:
I still haven't caught onto K-ON Cooney san. I was just saying when I read this post I always read STd shotguns and not TSD lol... Hopefully I'll see u all at the convention. I'll be bringing some money to shop so u guys better have this in stock! |
||
March 4th, 2011, 14:34 | #29 |
Iskaryot
|
I only have $150 to spend, tops
And I'm not even 100% sure if I'll be able to go or not yet, maybe only 60% sure... But its all kewl, as long as I can get a cheap shotty I can mess around with
__________________
|
March 4th, 2011, 14:38 | #30 |
Guest
|
Reminder about exercising restraint in this section. Timeouts are imminent.
|
|
Bookmarks |
|
|