WE M4 CQB - Neverending full-auto :P

[Matt 'Maverick' Watts]

The Guerilla regs can have their pressure lowered by getting a 'Low pressure spring'. it's installed by using an allen key to remove the top bonnet, pulling the internals, replacing the existing spring with the lp and rebuilding. Voila! your tank is now a low pressure output tank that will stabilize your shots and increase your efficiency!
.. If you're coming to 'Rescue Dawn' at Adrenaline Aug 8 I can show you how easy it is.

[Eeyore]

Only problem I see (because I use to play a shit ton of paintball) is that the hose hangs down from the bottom of the mag. I think it would be better served by having the hose come along the side of the receiver and into the mag from the back, like a pro-win mag for example.

[aZn_triXta07]

Originally Posted by Matt 'Maverick' Watts

The Guerilla regs can have their pressure lowered by getting a 'Low pressure spring'. it's installed by using an allen key to remove the top bonnet, pulling the internals, replacing the existing spring with the lp and rebuilding. Voila! your tank is now a low pressure output tank that will stabilize your shots and increase your efficiency!
.. If you're coming to 'Rescue Dawn' at Adrenaline Aug 8 I can show you how easy it is.

Is there a thread in a forum that has this? Unfortunately I will not be attending that game. I'm definitely interested.

Originally Posted by Eeyore

Only problem I see (because I use to play a shit ton of paintball) is that the hose hangs down from the bottom of the mag. I think it would be better served by having the hose come along the side of the receiver and into the mag from the back, like a pro-win mag for example.

The current setup I have allows you to keep the magazine the way it is so you can convert it back to using GG by replacing the fill valve.

Essentially all you need is something with the same threading that can hookup to a 6mm hose preferably a 4mm hose would work too. This would save having to buy the expensive fittings from Japan. In doing so the setup would be much cheaper.

If I were going to go to that extent of modifying I'd just have DaytonaGun make me a Classic out of a PTW lol

[Eeyore]

Originally Posted by aZn_triXta07

Is there a thread in a forum that has this? Unfortunately I will not be attending that game. I'm definitely interested.



The current setup I have allows you to keep the magazine the way it is so you can convert it back to using GG by replacing the fill valve.

Essentially all you need is something with the same threading that can hookup to a 6mm hose preferably a 4mm hose would work too. This would save having to buy the expensive fittings from Japan. In doing so the setup would be much cheaper.

If I were going to go to that extent of modifying I'd just have DaytonaGun make me a Classic out of a PTW lol

In that case make sure there is a quick disconnect like on a paintball remote like. Unlimited gas is great but mags still only have 30-50 bbs.

[aZn_triXta07]

Originally Posted by Eeyore

In that case make sure there is a quick disconnect like on a paintball remote like. Unlimited gas is great but mags still only have 30-50 bbs.

This is more for when the temperature is cold, I'm working on attaching a drum magazine just for shits & giggles.

The rig also already has two quick disconnects, one at the magazine and one at the 6mm hose which is for Classics.

[Eeyore]

Well I know from pb that HPA is much more consistant than c02 or propane. The only issue is that HPA tanks are heavy, unless you get a carbon fiber one which is usuallt about $300. Plus they have to be hydro tested every 3 years. I hope your mod works out for you.

[r3npogi]

:rolled eyes

[pakinshet]

YouTube - WE M4 HPA System GBBR CQBR