|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 19th, 2010, 13:21 | #16 |
Hi all.
The cylinder piece of the hop-up is installed and the reason the hop-up is at its max is because any lower and the bbs just drop. If I have it too low the bbs dont even shoot, they litterally fall out of the barrel. My hope is that if I use lighter bbs that will change? Also, its only 363mm now from 300mm. So its not too much of a change to it. |
|
March 19th, 2010, 15:04 | #17 |
Then there's something wrong with your gun. I'd advise sending it to a tech
|
|
March 19th, 2010, 15:11 | #18 |
Did you put the little rubber nub in..?
If it isn't in its proper slot, then theres not really anything actually pushing down on the hop up rubber. So it would make it effectively useless..
__________________
I love freedom and consequently America |
|
March 19th, 2010, 15:35 | #19 |
Official ASC Bladesmith
|
Yup, I'd suggest the above as well. If it's not there, then there is little to no change in hop up adjustment going from full off to full on.
|
|
Bookmarks |
|
|