mp5 sling mount

sarosh · February 17th, 2010, 22:11

the little "c" shaped metal peice came off my mp5 body so i cant attatch a sling onto it, is there anything i can do to be able to attatch a sling?

Love · February 18th, 2010, 18:44

Cant you attach a sling onto the end of the foregrip area? There should be a quick detach pin with a big hole through it.

sarosh · February 18th, 2010, 18:59

yes but then i have my gun hanging from the front end with the barrel pointed in my face. i have a 1 pt sling that was attacked to the back

Love · February 18th, 2010, 19:18

How're are you holding it/carrying it, so the barrel is in your face? :S

I'd say just sling it up the way I said, if theirs no alternative. Carry it differently or dont sling it at all. <3

TokyoSeven · February 18th, 2010, 19:21

Unfortunately I cant think of anything that does not require you to purchase something new. Do you use a full stock? You could always attach it to the side of the full stock if you have a full stock that is. Short of creating one of out spare materials you have laying around the only thing I could recommend at this time is to purchase a replacement part.

sarosh · February 18th, 2010, 19:21

i have a 1 point sling. the back sling attactment peaice came off the gun. so if i put the sling on only the front of my gun, it will hang with the front part faceing off. before when i had the 1 point sling on only the back the barrel was facing down.

sarosh · February 18th, 2010, 19:23

i have a retractable stock. before on the body i had a little metal loop on the body. now there is two holes in the body.

coach · February 18th, 2010, 19:25

Quote:

Originally Posted by sarosh

the little "c" shaped metal peice came off my mp5 body so i cant attatch a sling onto it, is there anything i can do to be able to attatch a sling?

Quote:

Originally Posted by sarosh

yes but then i have my gun hanging from the front end with the barrel pointed in my face. i have a 1 pt sling that was attacked to the back

am I right to assume that the clip you are talking about is the clip on the side of the mag well?

if so, how do you manage to use a 1 point sling attached to that?

take a picture or find a picture of the piece you're talking about. exactly which mp5 do you have?

Tex · February 18th, 2010, 19:32

On the retractable stock MP5's there is a metal lope for slings on the end cap I am sure that is what he means. Not the clip by the mag well or at least i hope that is what he is talking about.

like this
http://img.redwolfairsoft.com/upload...NGBLK-GNL-.jpg

pusangani · February 18th, 2010, 19:51

I have a spare end cap and I see the 2 holes for it, but the part he needs is missing

sarosh · February 18th, 2010, 19:53

ya tex has it thanks

coach · February 18th, 2010, 19:57

ah yes, the slither stock end cap. haven't had one of those on in a long time.

RW is out of stock. could just go with a full stock, folding stock or see if someone can order it for you.

sarosh · February 18th, 2010, 19:59

alright thanks. i think im gonna stay away from the 1 pt sling once i get a replacement peice. i think the gun was to heavy to be supported by the little metal piece.

coach · February 18th, 2010, 20:12

Quote:

Originally Posted by sarosh

alright thanks. i think im gonna stay away from the 1 pt sling once i get a replacement peice. i think the gun was to heavy to be supported by the little metal piece.

you could go with a full stock. a sling on it will support the weight and also hold a large battery.

sarosh · February 18th, 2010, 20:17

id like to keep the retractable stock so back to the original question do i need to buy another back peice or something?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 17th, 2010, 22:11	#1
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	mp5 sling mount the little "c" shaped metal peice came off my mp5 body so i cant attatch a sling onto it, is there anything i can do to be able to attatch a sling?

February 18th, 2010, 18:44	#2
Love formerly Lythinca Trader rating Join Date: Oct 2008 Location: You know that Home Depot on King st? Yeah, no where near there.	Cant you attach a sling onto the end of the foregrip area? There should be a quick detach pin with a big hole through it. __________________ Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig.

February 18th, 2010, 19:18	#4
Love formerly Lythinca Trader rating Join Date: Oct 2008 Location: You know that Home Depot on King st? Yeah, no where near there.	How're are you holding it/carrying it, so the barrel is in your face? :S I'd say just sling it up the way I said, if theirs no alternative. Carry it differently or dont sling it at all. <3 __________________ Currently modding AK. Loadout 1: Yugoslavian M76/Maadi RML Alternative (Kraken) CYMA Glock 18C Loadout 2: TM MP5 w/ flashlight CYMA Glock 18C Both Loadouts have Marpat Uniform, PASGT Helmet w/ Flecktarn, and Flecktarn chest rig.

February 18th, 2010, 18:59	#3
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	yes but then i have my gun hanging from the front end with the barrel pointed in my face. i have a 1 pt sling that was attacked to the back

February 18th, 2010, 19:21	#5
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Unfortunately I cant think of anything that does not require you to purchase something new. Do you use a full stock? You could always attach it to the side of the full stock if you have a full stock that is. Short of creating one of out spare materials you have laying around the only thing I could recommend at this time is to purchase a replacement part. __________________ "Its only a little bit on fire"

February 18th, 2010, 19:23	#7
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	i have a retractable stock. before on the body i had a little metal loop on the body. now there is two holes in the body.

February 18th, 2010, 19:32	#9
Tex Trader rating Join Date: Feb 2003 Location: Abbotsford, B.C.	On the retractable stock MP5's there is a metal lope for slings on the end cap I am sure that is what he means. Not the clip by the mag well or at least i hope that is what he is talking about. like this http://img.redwolfairsoft.com/upload...NGBLK-GNL-.jpg __________________ W-69 _/\|

February 18th, 2010, 19:51	#10
pusangani Official ASC "Dumb Ass" Trader rating Join Date: Jan 2008 Location: Scarbrah, Ontario	I have a spare end cap and I see the 2 holes for it, but the part he needs is missing __________________

February 18th, 2010, 19:57	#12
coach aka coachster Trader rating Join Date: Mar 2008 Location: T dot	ah yes, the slither stock end cap. haven't had one of those on in a long time. RW is out of stock. could just go with a full stock, folding stock or see if someone can order it for you.

February 18th, 2010, 19:59	#13
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	alright thanks. i think im gonna stay away from the 1 pt sling once i get a replacement peice. i think the gun was to heavy to be supported by the little metal piece.

February 18th, 2010, 20:17	#15
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	id like to keep the retractable stock so back to the original question do i need to buy another back peice or something?

mp5 sling mount

Newbie Tank