|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 6th, 2010, 23:40 | #1 |
Buying some parts soon.
Hey ASC, I need a little bit of advice on this one...
So a few months ago my ICS M4 died on me, and after a little bit of researching and testing, I found out it was the switch assembly. I've finally decided to go ahead and buy one from airsoftparts.ca , and figured that while I'm at it, I might aswell buy a couple more small parts. This is where I could use a little advice. I am looking for a new/better hop up. I was looking at this, http://www.airsoftparts.ca/store2/in...roducts_id=804 The thing is, I am aslo looking to boost my FPS a little. Hopefully to around 360-370. It says that this hopup unit works best with FPS's around 350. Should I choose a hopup that is rated for above 350, or does 10-20 fps not make a big difference? And also, is this a good hopup overall? At hop up units being such a low cost, I wouldn't mind paying a little more for the best. And I am wondering if this spring will boost my FPS to where I want it (360-370), http://www.airsoftparts.ca/store2/in...roducts_id=574 . And finally, is this switch assembly good quality, and will it fit without modification? http://www.airsoftparts.ca/store2/in...oducts_id=1017 Thanks in advance. |
|
February 6th, 2010, 23:48 | #2 |
First off, the Madbull hop-up rubber/bucking combo is shit. Any gun Ive seen with it has had major air leak problems and the performance is sub-par. If you want a good hopup try Guarder clear, Prometheus or Firefly. From my understanding hard rubbers are for 350+FPS and soft rubbers are for sub 350FPS, other than the Guarder which has been rated for sub 400FPS for the soft. Also soft rubbers tend to wear down allot quicker, but they are cheap as hell, so when ordering get a couple to have spares on hand.
M120 springs will give you roughly 400FPS, depending on your setup and whatnot. An M90 sounds like what you should be aiming for. And for the switch assembly Ive heard good things about the G&P switch but no first-hand experience.
__________________
My trust is in whiskey, in weed and in Slayer, its GODDAMN ELECTRIC - Pantera Last edited by Rock 'N' Roll Outlaw; February 6th, 2010 at 23:50.. |
|
February 6th, 2010, 23:50 | #3 |
If you ask me, Prometheus Soft. I know that someone was also recommending the Guarder Clear/Black too.
IMO if you really ask me 10-20 FPS isn't that much but if you really want to upgrade it then I've been told that Modify isn't that bad and the S100 (I believe it was rated for 370-380 FPS) or S110 (slightly shy of 400 FPS) is probably the ones you want. I'm not sure about the switch assembly though, you'll have to wait for someone else to reply.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
February 6th, 2010, 23:59 | #4 |
Thanks for the help, I think I'll go for this gaurder hop up, http://www.airsoftparts.ca/store2/in...roducts_id=642
And here, http://www.shortyusa.com/airsoft.htm...7.192&CA=&RID= it says that I should expect FPS to be about 330, which is what I currently have. |
|
February 7th, 2010, 00:07 | #5 |
Hmmm, maybe when that person tested his S100 spring his reading showed 300-330FPS but thats not the normal rating. S100 is equivalent of an M100 spring (just because the number is the same doesn't mean its rated the same, every company is different) and an M100 is rated for 360-380 FPS with .20s
|
|
February 7th, 2010, 00:16 | #6 | |
Quote:
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
||
February 7th, 2010, 00:38 | #7 |
Alright, well I think I'm going to lay off finalizing my decision about the spring untill I can comfirm whats going on :P
I have another quick question, what magazines are compatible with my ICS? |
|
February 7th, 2010, 01:07 | #8 |
Should be any.
|
|
February 7th, 2010, 02:22 | #9 |
I'm using a Modify S90 spring in my ak and get ~335fps with 0.20g bbs.
|
|
February 7th, 2010, 09:29 | #10 | |
* KNOWN LIAR *
|
Theres a spring comparison test
http://www.airsoftparts.ca/news/modifyspringtest.pdf
__________________
Quote:
|
|
February 7th, 2010, 14:37 | #11 |
I really appreciate the responses. After your help and a couple of PMs I recieved, I think I'll go with the S100.
And is there a certain company I should stick with for mags? I don't want to break the bank with these. I was hoping to get 2 for about 50$, would you recommend King Arms magazines? |
|
February 7th, 2010, 14:44 | #12 | |
Quote:
__________________
Weapons : 39 airsoft weapons. Daf YA 314, 3 ton Dutch Army Truck. Retired Reg.Force 1 Brigade RECCE. nmvac.org |
||
February 7th, 2010, 14:52 | #13 | |||
Quote:
If you looking for a little over 350, i would use a M100+ tight-bore barrel Quote:
__________________
Quote:
Chinese proverb
|
||||
February 7th, 2010, 15:16 | #14 |
I am canadian, but I wasn't planning on buying from them. I was just using that link as a comparason.
And I will eventually upgrade my M4 more, so I will be hoping for about 370 after; new barrel(6.04?), new nozzle, new piston head(looking at the Angel silent combo), and probably a new motor(something high torque most likely). And I just ordered that EoTech clone from DealExtreme, should come in a few weeks. |
|
February 7th, 2010, 15:49 | #15 |
Angel.... that's a name I haven't heard in a long time. As an aside does anyone know whatever happened to them?
Before when I just joined it sounded like it was a "big name brand" but just stopped receiving attention and people stopped advertising that their guns had Angel parts in them (kind of like how some people say "All SystemA parts" or "all Prometheus parts" or "all Laylax parts"). As for mags, I personally go with the Magpul "Green Label" Mags (their "cheaper" line of mags). STAR (or ARES should I say) is their OEM manufacturer and I've been happy with the STAR mags I have right now and so bought some of those green label ones, haven't tested them out yet but they're affordable and if you lose one then so what it's not $15 down the drain rather it's like $8 down the drain (hopefully you find it in the end though).
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
|
Bookmarks |
Thread Tools | |
|
|