Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Mp5 battery

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old January 21st, 2010, 18:36   #1
Mr-FusioN
 
Mr-FusioN's Avatar
 
Join Date: Jan 2010
Location: Waterloo, ON
Mp5 battery

I have my original 8.4 battery in the stock, but i also have the collapable stock. I m not sure what size battery to buy that will fit in the front of the mp4. i tryed the Intellect 9.6V 1600mAh Ni-MH Battery (Mini Type) and it does not fix.
I dont want to go any lower than a 8.4v.
any suggestions on which to use.

Thx
Mike
Mr-FusioN is offline   Reply With Quote
Old January 21st, 2010, 18:39   #2
SHÖCK
aka SNK or Shaniqua
 
SHÖCK's Avatar
 
Join Date: May 2008
Location: Calgary, AB
"Intellect 9.6V 1600mAh Ni-MH Battery (Mini Type)" will fit, it is just really hard to get it to fit.

If you can't get it to work, move down one cell to an 8.4v mini battery (5 cells versus 6 for the 9.6v).

Otherwise, you can use a lipo battery.
__________________
SHÖCK
SHÖCK is offline   Reply With Quote
Old January 21st, 2010, 18:47   #3
Mr-FusioN
 
Mr-FusioN's Avatar
 
Join Date: Jan 2010
Location: Waterloo, ON
the best fit i got in with it was pushing apart the plastic.
I didnt like that and I tryed for about an hour differnt ways.
Also is it true if a lipo dies its dead forever?

Thanks

ill go with the 8.4 mini.
Mr-FusioN is offline   Reply With Quote
Old January 21st, 2010, 19:10   #4
SHÖCK
aka SNK or Shaniqua
 
SHÖCK's Avatar
 
Join Date: May 2008
Location: Calgary, AB
If a lipo dies, it's because you overdischarged it beyond it's minimum voltage. It won't just be dead forever, it will start buldging as the gases from the damaged cells try to escape.

I can fit a 9.6v mini into my Mp5 handguard, it's really tight and I had to rewire it and cut out the fuse box but it worked.
__________________
SHÖCK
SHÖCK is offline   Reply With Quote
Old January 21st, 2010, 19:32   #5
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
If you are confident, or have a gun tech near you, rework the battery you have to make it an 8.4V, only requires removing the bottom two cells, and soldering in one of them. Five 1.2V cells make 8.4V, six makes 9.6V. It'll work, and might save you a bit of cash. Alternatively, if you are more into shooting people and having fun rather than "playing pretend" but dressing up as a SWAT, etc. (basically that whole "impression" thing that many guys do), you can go the route of keeping your 9.6V, wrapping it in black electrocution tape, and tape/zip tie it to the outside of your foregrip. I do that with a large 8.4V battery, I'm not shy about it, I go to play and shoot people. I'm not in it for looks. Lol
CDN_Stalker is offline   Reply With Quote
Old January 21st, 2010, 22:49   #6
Mr-FusioN
 
Mr-FusioN's Avatar
 
Join Date: Jan 2010
Location: Waterloo, ON
im looking at the Intellect 8.4v 1600mAh Ni-MH Battery (Classic Army 2 Pcs Type), it dose not say mini so are the cells large type or still mini and it just doesnt say?

Plus i have the classic mp5 front grip as well as the one with rails the mini type i tryed b4 just cramed into the one with rails with a little plastic bending, but there was no chance of it fitting into the classic style one(because it gets smaller near the front) I am just wondering if this Intellect 8.4v 1600mAh Ni-MH Battery (Classic Army 2 Pcs Type) will fit in the classic style one, as well as the one with rails?
Mr-FusioN is offline   Reply With Quote
Old January 21st, 2010, 22:52   #7
SHÖCK
aka SNK or Shaniqua
 
SHÖCK's Avatar
 
Join Date: May 2008
Location: Calgary, AB
Quote:
Originally Posted by Mr-FusioN View Post
im looking at the Intellect 8.4v 1600mAh Ni-MH Battery (Classic Army 2 Pcs Type), it dose not say mini so are the cells large type or still mini and it just doesnt say?

Plus i have the classic mp5 front grip as well as the one with rails the mini type i tryed b4 just cramed into the one with rails with a little plastic bending, but there was no chance of it fitting into the classic style one(because it gets smaller near the front) I am just wondering if this Intellect 8.4v 1600mAh Ni-MH Battery (Classic Army 2 Pcs Type) will fit in the classic style one, as well as the one with rails?
You have this shape battery right?
http://www.ebairsoft.com/sanyo-1800m...tery-p-37.html

You just need the one that is one cell less:
http://www.ebairsoft.com/sanyo-1800m...tery-p-36.html

Unless your foregrip is the flashlight model, I have been able to cram the 6 cell 9.6v mini battery in there.
__________________
SHÖCK
SHÖCK is offline   Reply With Quote
Old January 21st, 2010, 23:28   #8
Mr-FusioN
 
Mr-FusioN's Avatar
 
Join Date: Jan 2010
Location: Waterloo, ON
the only battery i have right now is the original 8.4v large cell, it only fits in the stock. with 7 cells it looks like the one you say i need but it is way too big.
Mr-FusioN is offline   Reply With Quote
Old January 21st, 2010, 23:46   #9
cerealmaniac
 
cerealmaniac's Avatar
 
Join Date: Jun 2008
Location: Alberta
Send a message via MSN to cerealmaniac
you'll need a 8.4V mini battery. or if you want to fit a 9.6V you can get a large handguard
__________________

飛虎隊
NEED ANY OLD/USED AK/MP5 PARTS!PM ME!
Sales Thread Click Me
AEG sales thread
cerealmaniac is offline   Reply With Quote
Old January 22nd, 2010, 06:48   #10
chaosnemesis
 
chaosnemesis's Avatar
 
Join Date: Nov 2008
Location: Toronto
i've had problems fitting in the 9.6 mini in my handguard as well. Some mini types have a plastic cap or added plastic at the ends to solidify the stacks and it's this added plastic that's making it just a hair too big too fit in properly. Some will fit some won't. However, a 9.6 intellect nunchuck battery lacks the added caps and fits in quite easily.
chaosnemesis is offline   Reply With Quote
Old January 22nd, 2010, 07:21   #11
SHÖCK
aka SNK or Shaniqua
 
SHÖCK's Avatar
 
Join Date: May 2008
Location: Calgary, AB
Cut off the caps, replace with tape
__________________
SHÖCK
SHÖCK is offline   Reply With Quote
Old January 22nd, 2010, 14:22   #12
DarkAngel
* Age Verifier status suspended *
 
DarkAngel's Avatar
 
Join Date: Jun 2006
Location: Scarborough
Send a message via MSN to DarkAngel
Quote:
Originally Posted by CDN_Stalker View Post
If you are confident, or have a gun tech near you, rework the battery you have to make it an 8.4V, only requires removing the bottom two cells, and soldering in one of them. Five 1.2V cells make 8.4V, six makes 9.6V. It'll work, and might save you a bit of cash. Alternatively, if you are more into shooting people and having fun rather than "playing pretend" but dressing up as a SWAT, etc. (basically that whole "impression" thing that many guys do), you can go the route of keeping your 9.6V, wrapping it in black electrocution tape, and tape/zip tie it to the outside of your foregrip. I do that with a large 8.4V battery, I'm not shy about it, I go to play and shoot people. I'm not in it for looks. Lol
What he said
Attached Images
File Type: jpg IMG_5893.jpg (142.0 KB, 9 views)
__________________

Certified Sniper Clinic Instructor and Counter Sniper
Sentinel Arms Customs - Specializing In Unique, One of a kind guns
DarkAngel is offline   Reply With Quote
Old January 22nd, 2010, 14:47   #13
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
Am I way off something here?

Up until I read this thread I would have sworn that "regular mini" 8.4v packs were 7 cells (1.2v each) (7 x 1.2v = 8.4v? right?). Configured like this sh*tty diagram:

===|

and that 9.6v minis were often configured in two rows of 4 cells (8 total = 9.6v). Like this:

====

I think what Stalker meant was to take one cell out of the 8 cell pack and turning another one over sideways to make it into a regular 7 cell (8.4v) mini pack.

And most MP5 handguards still fit a 8.4v 1600 mAh mini?

Like the guys said...splitting away some of the packing/casing might help. You can reconfigure the pack in serial any way you want...as long as you have good joints and don't short anything out.

Last edited by m102404; January 22nd, 2010 at 14:49..
m102404 is offline   Reply With Quote
Old January 22nd, 2010, 15:00   #14
kylem_8
 
kylem_8's Avatar
 
Join Date: Aug 2006
Location: kitchener ON
Send a message via MSN to kylem_8
ya, i was wondering why people kept saying the wrong information....
kylem_8 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 20:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.