|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 26th, 2009, 02:25 | #1 |
M4 Scope affected by front sight
Can anyone tell me or have a picture of how much is block when you use an ACOG or Red dot with the front sight post one? Like the fix ones from M4/M16
|
|
July 26th, 2009, 02:29 | #2 |
acog clears it on mine
u dont even see the front sight at all |
|
July 26th, 2009, 02:29 | #3 | |
Suburban Gun Runner
|
It depends. If you put it on the carry handle then it the front sight wont block the view at all. If you remove the carry handle and mount in on the rail you will definatley need a riser.
__________________
Quote:
|
|
July 26th, 2009, 02:35 | #4 |
asexual lumbricus terrestris
|
my triangle blocks a elcan right til the crosshairs when it's mounted on a flat top
|
July 26th, 2009, 02:35 | #5 |
* AV revoked *
|
Well, if you put the Eotch or Aimpoint without riser then it would appear in your optic but for ACOG, I'm pretty sure that you won't even knew that it exist in there. No doubt about that. Hope it help.
KND |
July 26th, 2009, 02:56 | #6 |
Ptw m16 with real acog:
|
|
July 26th, 2009, 02:58 | #7 |
A-56 aka Mr.Hitman
|
Why not get a flip up if you're that concerned about it?
Normally, you need to have it co-witnessed incase your optics do fail. As for RDS, you need to have both eyes opened, not only one. |
July 26th, 2009, 12:43 | #8 |
Regardless if ure using an ACOG (non-magnified) or aimpoint, shouldnt the top edge of the front sight be touching the reticle? Hence, shouldnt the front sight always be in view when looking through a RDS??
|
|
July 26th, 2009, 13:03 | #9 |
I had the same problem. And the solution is saw off your front sight!...
Or... Get a flip up front sight just in case your RDS runs out of battery in middle of a big massive outdoor game. |
|
July 26th, 2009, 13:46 | #10 |
pɹıq spɹɐʍʞɔɐq
|
I have an AimPoint and it clear the IronSight without any risers.
|
July 26th, 2009, 13:59 | #11 |
* AV revoked *
|
You are talking about aimpoint in your sig, right ? if so then it would clear all the way since that aimpoint already had riser.
Last edited by KND; July 26th, 2009 at 14:04.. |
July 26th, 2009, 14:03 | #12 |
pɹıq spɹɐʍʞɔɐq
|
Yes, you are right of course it comes with its own riser.
|
July 26th, 2009, 16:29 | #13 |
I got myself one of these and it works perfectly. I didn't have to change the front sight and now when you look thru my sight, the dot sits perfectly on top of the front sight.
Check this out......http://www.airsoftparts.ca/store2/in...roducts_id=205
__________________
BLACKCADDI~TEAM SPARROW |
|
July 26th, 2009, 16:33 | #14 | |
Quote:
__________________
I love freedom and consequently America |
||
July 26th, 2009, 16:39 | #15 |
are u talking about the ACOG with 4x scope or the acog with no magnification/
|
|
|
Bookmarks |
Thread Tools | |
|
|