|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
July 12th, 2009, 19:39 | #1 |
can I modify a TM rubber and put it in a KSC?
Heya all
I can't find any hop rubber for KSC glock 26. however there are still some TMs around. could I modify a tm to fit it on a KSC? thanks !
__________________
|
|
July 12th, 2009, 21:23 | #2 |
Impossible.
__________________
Team P.I.M.P. Vancouver BC -Guntech(PM or E-mail only) |
|
July 13th, 2009, 05:00 | #3 |
aka SNK or Shaniqua
|
__________________
SHÖCK |
July 13th, 2009, 07:48 | #4 |
why impossible? what's the difference?
thanks for the link but KSC rubber is out of stock in US and also out of stock in HK. I need a quick solution...
__________________
|
|
July 13th, 2009, 07:56 | #5 |
Buy a new gun?
|
|
July 13th, 2009, 08:03 | #6 |
aka SNK or Shaniqua
|
I feel for you and I am now panicking myself as I cannot find a replacement for my own USP .45 They are moving everything to System 7 and us old users are left in the cold. My USP is a paperweight right now! Let me know if you find a source.
__________________
SHÖCK Last edited by SHÖCK; July 13th, 2009 at 08:25.. |
July 13th, 2009, 08:51 | #7 |
Ok but what's the diff between the TM part and the KSC, apart from the rectangle piece of rubber sticking out on the TM, and the need for a hole for the metall bb in the ksc one?
__________________
|
|
July 13th, 2009, 12:46 | #8 |
i happen to have an extra hop up rubber for the KSC G26 if you would like it. gimme a few bux and pay for shipping and it's yours. i also have the hop up metal ball if you need it
|
|
July 13th, 2009, 12:57 | #9 |
PM'd
__________________
|
|
July 13th, 2009, 14:11 | #10 |
aka SNK or Shaniqua
|
Well there you go. KSC Glock buckings seem to be more common (because of the glock's popularity). I still have my own problem of no hop up bucking for my USP (I have contacted KWAUSA and am trying to contact Tirador).
Does anybody know where to find one? Or if a glock bucking will work? Or going back to the OP's question, is it possible to modify another bucking?
__________________
SHÖCK |
July 13th, 2009, 15:26 | #11 | |
Quote:
Last edited by MikeMcNair; July 13th, 2009 at 15:26.. Reason: edit for pic |
||
July 13th, 2009, 16:01 | #12 |
No type of AEG bucking will work without some creative modification. KSC pistol rubbers are very thick in comparison to AEG rubbers and also have a special dimple on the top for the bearing to sit in.
__________________
JG HK416 KWA USP |
|
July 13th, 2009, 16:05 | #13 |
Harvester of Noobs' Sorrow
|
who said anything about using an AEG bucking? you know TM makes pistols too right?
im using a TM colt barrel in my KSC USP45.. so who knows, maybe with a bit of cutting it would work.
__________________
Weapons Technician / Gunsmith Don't look at me, I don't know, lol ¯\(°_o)/¯. |
July 13th, 2009, 16:41 | #14 | |
aka SNK or Shaniqua
|
Quote:
__________________
SHÖCK |
|
July 13th, 2009, 16:47 | #15 |
|
Bookmarks |
Thread Tools | |
|
|