Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

What are the CANSOFT regulations?

:

Newbie Tank

Reply
 
Thread Tools
Old June 10th, 2009, 02:27   #1
Farmer Brown
 
Join Date: Jul 2008
What are the CANSOFT regulations?

Hey I really need to know what the CANSOFT regulations are for importing into Canada...I have looked on this board and found nothing but references to the receiver...alot of clearsoft being seen but what is the exact regulations, lower receiver, grip, square cm? what needs to be clear...?

Last edited by Farmer Brown; June 10th, 2009 at 02:35..
Farmer Brown is offline   Reply With Quote
Old June 10th, 2009, 02:48   #2
The Saint
 
The Saint's Avatar
 
Join Date: Jan 2005
Location: Quebec
Cansoft products are largely specially made for Canadian retailers. They're usually unavailable for retail outside of Canada, so there's no point in trying to import them if you're not already a cansoft business.

I don't know what the mystery is to you. As you've said, plenty of references to clear receivers. A quick look at a cansoft AEG will tell you what that means.
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame."
The Saint is offline   Reply With Quote
Old June 10th, 2009, 02:49   #3
surebet
Vicious MSPaint Wizard
 
surebet's Avatar
 
Join Date: Aug 2004
Location: Longueuil, Quebec
Typically, the only legally importable guns from out of the country will be fully clear and horrible.
__________________
Annoyingly good with numbers

Stop American Censorship
surebet is offline   Reply With Quote
Old June 10th, 2009, 20:53   #4
Turnbull
 
Turnbull's Avatar
 
Join Date: Aug 2008
Location: Montreal, Quebec
Essentially, to my understanding, the whole Cansoft idea was created as a method of clearing customs. As a general rule, if the gun looks real, with a solid paint scheme, then the odds of it clearing customs isvery, very low. Of course, there have been cases where these such AEGs have made it through customs, but they seem to be very few and far between. In an attempt to market products to Canada, major producers of these AEGs implemented a plan to produce their AEGs with clear lower receivers, which denotes the gun as "not real". These such AEGs have a much higher chance of clearing customs, with the small chance of being confiscated mainly attributed to the judgement of the customs officials. You never know, the official might be in a bad mood, just heard that his wife has cheated on him, and decide to be a prick and confiscate the item... Catch my drift?
__________________
I knew a man once who said "Death smiles at us all. All a man can do is smile back."
Turnbull is offline   Reply With Quote
Old June 10th, 2009, 21:01   #5
Brian McIlmoyle
8=======D
 
Brian McIlmoyle's Avatar
 
Join Date: Apr 2005
Location: Toronto
The part of the gun that has the serial Number on it ( in a real gun ) needs to be made of clear material

So for most Rifles that is the lower receiver.
For common SMGs like the mp5 that is the upper receiver
for pistols it is the frame that must be clear

as a rule ... the largest part of the body must be clear to have the guns fall well within being classified as a "imitation" firearm ( ok to import by anyone) and not a "Replica Firearm" ( only importable with a special import license and not legal to retail to non BFL holders )
__________________
Brian McIlmoyle
TTAC3 Director
CAPS Range Officer
Toronto Downtown Age Verifier

OPERATION WOODSMAN

If the tongue could cut as the sword does, the dead would be infinite
Brian McIlmoyle is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 22:33.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.