|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
April 28th, 2009, 17:10 | #1 |
tf 16 parts
hey ppl, i know theres a thread on the tf 16 extra mag, but im looking for something else, a spring, are there any springs i can get that fit the tf16 that can increase is from 380 to 400-450? and while im at it, how do you change the spring?
|
|
April 28th, 2009, 17:11 | #2 | |
That gun would probably explode shooting 400 fps or more.
__________________
Quote:
|
||
April 28th, 2009, 17:39 | #3 |
Good luck with that. A 400+ fps spring will snap that mechbox like it was made out of dry twigs. It just barely holds together as it is with its stock spring.
__________________
|
|
April 28th, 2009, 20:32 | #4 |
likes being humiliated
|
if anything de grading the spring and getting a tight bore and some metal shimms would keep ur gun at the same fps but more accurater/and keeps the gun life a little longer
|
April 28th, 2009, 20:40 | #5 |
Better yet would be a whole gearbox replacement.
A SystemA M130 might do the trick. YOU WILL NOT BE ABLE TO RUN A HOT GUN ON ANY FIELD. 1) Snipers usually have to pass a "sniper course" (which chances are you don't have) 2) They usually have to have lots of experience (something you also don't have) 3) You must have your gun pinned to single shot or bolt action (your gun is capable of full auto) 4) That's not a "sniper rifle" by any means at all it's an assault rifle. If it were an SPR then yeah I could see that but it's not. Spring change, www.mechbox.com
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
April 28th, 2009, 20:51 | #6 |
Give it time. It's a TF16. That'll come soon enough from regular use of the stock gun...
__________________
|
|
|
Bookmarks |
Thread Tools | |
|
|