April 27th, 2009, 21:10 | #1 | |
just got this...good deal?
i just got this used KJW full metal M9 for $190 shipped. just wondering if it's a good price. most airsoft pistols i see on sites retail for around 200 with tinted grips so i assumed it was a good deal. here's what it includes:
Quote:
|
||
April 27th, 2009, 21:13 | #2 |
Ditch the BB's for some Bastards, pick up some silicone oil for the magazines, and you should be ready to rock 'n roll.
|
|
April 27th, 2009, 21:16 | #3 |
Nice Guy
|
Its only a good deal until you get it and check it out , you never know how well its been used or what problems will show up
|
April 27th, 2009, 21:22 | #4 |
yea definately not using those bb's. i have a bag of bastards lying around in my basement that are waiting to fly now that my rifle is out of commission.
that's true...keeping my fingers crossed! |
|
April 27th, 2009, 21:23 | #5 |
aka coachster
|
lube it up and charge the mags carefully. if they are dry you'll want to make sure the seals get some silicone in them or you'll blow them out with a full propane charge. seals are not easily found.
if you give it a half second fill and it starts to piss gas, I'd break it down and give the seals and orings a silly bath so that they get nice and fat. |
April 27th, 2009, 21:30 | #6 |
asexual lumbricus terrestris
|
Good deal if that guy hadn't been using those... My personal rule is to not trust people on facebook, but who knows, it may well be in excellent condition.
|
April 27th, 2009, 21:40 | #7 |
so, lube, charge slowly and carefully...lube seal and orings if dry or leaky. got it! thanks
@yuhaoyang: i generally don't trust it either but i gave in this time. |
|
April 27th, 2009, 21:52 | #8 |
asexual lumbricus terrestris
|
Probably a good idea to take everything in the slide assembly apart and give it a good wipe before you lube them as well to clean out the old dirty dusty lube =p.
|
April 27th, 2009, 22:38 | #9 |
April 27th, 2009, 22:39 | #10 |
O-rings are super easy to find for most pistols, especially KJ Beretta's.
Go to any home depot, or any hardware store really. Get o-rings that are used for taps, try and find the mid-small size. I cant remember the exact dimensions but I can find them for my TM 1911 MEU in o-ring kits by MOEN. KJ Beretta's are tanks. Just be careful with the right side safety. |
|
April 27th, 2009, 22:59 | #11 | |
aka coachster
|
Quote:
|
|
April 27th, 2009, 23:01 | #12 | |
Quote:
|
||
April 27th, 2009, 23:41 | #13 |
The main seals on the bottom of the mags.
Never had any issues aside from a KJ 226 after replacing the stock ones after they go off. |
|
April 28th, 2009, 00:00 | #14 |
aka coachster
|
The main seals are the ones that go dry and leak. sometimes can be averted by tightening the screw, but there's only so much to tighten.
|
April 28th, 2009, 00:55 | #15 |
Official ASC "Dumb Ass"
|
lol yep, both my KJW and my WE Beretta's have the same issue, it likes to jump off the gun when firing it, I just take them off just in case.
__________________
|
|
Bookmarks |
Thread Tools | |
|
|