|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 6th, 2009, 16:06 | #1 |
O-ring dimensions and name
Hey all
What are the reference and official dimensions of the O-ring used in AEG cylinders ? (I'm talking TM standard here) I wanna buy some a little bit bigger but I have no idea what reference to search for. Also micro-measuring a deformed rubber piece is not easy thanks for your help!
__________________
|
|
March 6th, 2009, 21:16 | #2 | |
Quote:
Just try one size that looks right, and then try it with a smaller or larger one until you get it right "O" ring. Physically insert the piston head (with the "O" ring installed) into the cylinder until you find the one that gets you a good seal with out jambing on the edges of the cylinder when you insert it. And it is a standard size based on the cylinder's size regardless of which brand of gun. SHA DO
__________________
Last edited by Sha Do; March 6th, 2009 at 21:20.. |
||
March 7th, 2009, 14:50 | #3 |
ok thanks!
yes I have a bunch of plumbing o-rings sets, but they are either exactly the same size or way off. I noticed on the internet you can get sets of orings in super precise sizes, that's why.
__________________
|
|
March 9th, 2009, 01:09 | #4 | |
Try asking on airsoftmechanics.com...they have tons of info and lots of users who are tech geeks to help. Someone there will know.
__________________
Quote:
|
||
March 9th, 2009, 02:04 | #5 |
Tokyo Marui piston head oring
radial: 2.5 mm inner diameter: 19 mm (0.1 +-) Tokyo Marui cylinder head oring radial: 1.5 mm inner diameter: 18 mm (0.1 +-)
__________________
CLICK HERE TO MY WEBSITE Last edited by Tirador; March 9th, 2009 at 02:10.. |
|
|
Bookmarks |
Thread Tools | |
|
|