MAG 100rd Sig 552 Problem

Rotting · February 24th, 2009, 01:03

I recently purchased 2 MAG brand 100rd SiG series magazines. Today I recieved my speed loader and tried to load the magazine to the brim, and it struggled trying to force in about 30 rounds. Today I also put in a new inner barrel, and decided to get some test shots going. I made a few shots, all were blanks.

I brought the gun back inside and looked at it to see if it was jammed somehow, and the gun is fine. I took the magazine out, and I didn't even get the typical 1 or 2 rounds that spill out. The magazine doesn't seem to be feeding them, and when I manually pulled back on the part that keeps them in, they didn't end up coming out, and normally they should have just all flown right up into the air, no?

Anyone able to give some advice on what to do? Thanks in advance!

shadow_matter · February 24th, 2009, 02:08

When you shake the mag do the bb's rattle around inside the feeding tube? or does it sound solid?

Rotting · February 24th, 2009, 13:30

Sound solid.

shadow_matter · February 24th, 2009, 14:15

The BB's are stuck somewhere in the channel, probably jamming them between the plunger (bb pusher) and the block in the channel. Try some silicone lube, smacking the mag upside down etc. If the BB's are close enough to the feed opening try inserting a thin allen key to unlodge the BB's.

I had the same issue, usually a good bit of lube and some poking will free it up. Just make sure that you don't overload the mags or they will be prone to jamming.

voorhees -FWA- · February 24th, 2009, 14:22

is there nothing silicone oil can't do?!?!

lol

Rotting · February 24th, 2009, 14:35

Do I need a silicone oil spray for the spring, or what? I'm not sure how to lube the inside of the magazine, I just know that I have to lube it.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 24th, 2009, 01:03	#1
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	MAG 100rd Sig 552 Problem I recently purchased 2 MAG brand 100rd SiG series magazines. Today I recieved my speed loader and tried to load the magazine to the brim, and it struggled trying to force in about 30 rounds. Today I also put in a new inner barrel, and decided to get some test shots going. I made a few shots, all were blanks. I brought the gun back inside and looked at it to see if it was jammed somehow, and the gun is fine. I took the magazine out, and I didn't even get the typical 1 or 2 rounds that spill out. The magazine doesn't seem to be feeding them, and when I manually pulled back on the part that keeps them in, they didn't end up coming out, and normally they should have just all flown right up into the air, no? Anyone able to give some advice on what to do? Thanks in advance! __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

February 24th, 2009, 02:08	#2
shadow_matter Trader rating Join Date: Dec 2006 Location: Kitchener Ontario	When you shake the mag do the bb's rattle around inside the feeding tube? or does it sound solid? __________________ Call sign: Shadow_Matter "I play airsoft, yes yes..."

February 24th, 2009, 13:30	#3
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	Sound solid. __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

February 24th, 2009, 14:15	#4
shadow_matter Trader rating Join Date: Dec 2006 Location: Kitchener Ontario	The BB's are stuck somewhere in the channel, probably jamming them between the plunger (bb pusher) and the block in the channel. Try some silicone lube, smacking the mag upside down etc. If the BB's are close enough to the feed opening try inserting a thin allen key to unlodge the BB's. I had the same issue, usually a good bit of lube and some poking will free it up. Just make sure that you don't overload the mags or they will be prone to jamming. __________________ Call sign: Shadow_Matter "I play airsoft, yes yes..."

February 24th, 2009, 14:22	#5
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	is there nothing silicone oil can't do?!?! lol

February 24th, 2009, 14:35	#6
Rotting Roko Trader rating Join Date: Feb 2009 Location: Windsor, Ontario	Do I need a silicone oil spray for the spring, or what? I'm not sure how to lube the inside of the magazine, I just know that I have to lube it. __________________ Primary: Custom WE M16A3 Secondary: KWA MP9 Side: Custom WE M1911A1

MAG 100rd Sig 552 Problem

Doctor's Corner