|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
October 6th, 2008, 20:45
|
#1 | |
|
G36C Silencer
I am looking to extend the inner barrel on my G36C, Thinking of hiding it in a silencer
I know the threads are a bit hidden inside the hand gaurd and therefor a narrow silencer is needed... Anyone know what the dimensions of a silencer that would work are? Most seem to be 40ish mm's wide...
__________________
Quote:
Chinese proverb
|
|
|
|
|
October 6th, 2008, 22:10
|
#2 |
|
You could also get a G36k extension barrel and use that with a flashhider, or that paired with a silencer of some sort.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
October 6th, 2008, 22:51
|
#3 |
|
Division
|
__________________
 Weee! |
|
|
|
|
October 7th, 2008, 01:15
|
#4 | |
|
aka SNK or Shaniqua
|
Quote:
  I have a 420mm barrel in there. I probably could have gone with a 455mm AK barrel. Definetely don't use a 40cm diameter silencer. They are so fat. 20-35mm at most.
__________________
SHÖCK 
Last edited by SHÖCK; October 7th, 2008 at 17:30.. |
|
|
|
|
|
October 7th, 2008, 17:05
|
#5 | |
|
|
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
October 7th, 2008, 17:13
|
#6 |
|
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
|
|
October 7th, 2008, 17:20
|
#7 | |
|
|
thanks Saint, although the silencer that SNK has on there seems to fit pretty solid, It looks to me like the one from airsoftparts.ca that i inked... if it will fit without me having to spend another 30 bucks on the extender, then im set.
just wanna make sure that that is in fact the one hes talking about.
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
October 7th, 2008, 17:28
|
#8 | |
|
aka SNK or Shaniqua
|
Quote:
__________________
SHÖCK
|
|
|
|
|
|
October 7th, 2008, 18:01
|
#9 | |
|
|
alright thanks, i guess worst case scenario,it arrives, doesn't fit, and i suck it up and pay the extra 30 bucks for the extender
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
October 7th, 2008, 18:08
|
#10 | |
|
aka SNK or Shaniqua
|
Quote:
__________________
SHÖCK
|
|
|
|
|
|
October 7th, 2008, 19:40
|
#11 | |
|
|
wait, i mean the
http://www.airsoftparts.ca/store2/in...oducts_id=1134 are you saying that wont fit? its like the same as yours...
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
October 7th, 2008, 22:30
|
#12 | |
|
aka SNK or Shaniqua
|
Quote:
It will fit nomatter what. 
__________________
SHÖCK
|
|
|
|
|
|
October 7th, 2008, 23:03
|
#13 | |
|
Quote:
Where did you get that top rail with H&K markings on it? is that from a RS one?
__________________
"Certainly there is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never really care for anything else thereafter." - Ernest Hemingway |
|
|
|
|
|
October 8th, 2008, 23:07
|
#14 | |
|
|
well, gone ahead and ordered my silencer and my tight bore,
got a 455mm, AK barrel I am wondering if you think it will be too long, anyone with tight bore experience have any ideas? stock G36 barrel is 247mm+a 195mm tight bore, that gives me 442mm of space, Think that the extra 13mm will fit? its almost nothing, ima thinking that the 247 is leavening a few cm's of space extra.. thoughts? knowledge? please... enlighten me!
__________________
Quote:
Chinese proverb
|
|
|
|
|
|
October 8th, 2008, 23:14
|
#15 |
|
Just make sure that you change your cylinder so that it matches the length of your barrel.
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
