Stock question for Maruzen CA 870 CQB

[rexdlu]

Ok guys, for the first time ever, i used the search button, and DIDN'T come up with a good answer.

I have this gun, Maruzen CA 870 CQB

http://www.007airsoft.com/products/p...ages/11016.jpg

who, what where how when do I get my hands on a stock that'll bolt on, or is there a stock that I can modify to make fit? I just want a stock. Somebody had asked this qestion quite some time ago, so I'm hoping since then somebody may have run into something for me.

Thanks guys!
Rex

[rexdlu]

nobody yet?

[Kos-Mos]

leave people some time.

Most people WORK, even on week-ends.

You usually get answers after 2 days max.

and google a bit more... I don't have a shotty, but I know that most stocks that are made for CA870, M870 or the realsteel one will fit.

[rexdlu]

yeah i thought I was a bit quick on my own reply, but I was hoping it wouldn't get pushed aside with all the new posts and threads coming up.

I'll be patient.........waiting.....*twiddling thumbs....cleaning out barrel...*

[rexdlu]

Originally Posted by Kos-Mos

leave people some time.

Most people WORK, even on week-ends.

You usually get answers after 2 days max.

and google a bit more... I don't have a shotty, but I know that most stocks that are made for CA870, M870 or the realsteel one will fit.

Even google didn't have an answer for me, or I searched it wrong, but I'm usually a pretty hardcore internet/google junkie. So whoever has the answer must be an angel.

[tunabreath]

What kind of stock?
http://www.wgcshop.com/pcart/shopper...390_srch_ca870
http://www.wgcshop.com/pcart/shopper...-01_srch_ca870
http://www.wgcshop.com/pcart/shopper...386_srch_ca870
http://www.wgcshop.com/pcart/shopper...K07_srch_ca870
http://www.redwolfairsoft.com/redwol...l?prodID=22363
http://www.redwolfairsoft.com/redwol...l?prodID=17549
http://www.redwolfairsoft.com/redwol...l?prodID=17378

If you like the rail+M4 stock one, there's a cheaper one on WGC as well that I couldn't find at the moment. It doesn't take 12g CO2 though. I think the STAR one without the rail is cheapest of the three. Not sure...

For the CA870 and Tanaka M870, all of those should be as simple as screwing on with the stock screw. The Maruzen M870 and M1100 are a LOT more difficult, since they can only use stocks with a gas system built in (unless you go external), while the CA870 can use any stock, gas system or not.

*edit, was it me who asked this question some time ago?
I was looking for stock solutions as well for the M1100 rev3 a while back. I found a ton of CA870 stocks, but very very few M870/M1100 ones.

**edit, here's that other M4 style stock:
http://www.wgcshop.com/pcart/shopper...C-391_srch_870
apparently this is the cheapest one. Just tug out the gas canister/hose and sell it to someone.

[rexdlu]

Originally Posted by tunabreath

What kind of stock?
http://www.wgcshop.com/pcart/shopper...390_srch_ca870
http://www.wgcshop.com/pcart/shopper...-01_srch_ca870
http://www.wgcshop.com/pcart/shopper...386_srch_ca870
http://www.wgcshop.com/pcart/shopper...K07_srch_ca870
http://www.redwolfairsoft.com/redwol...l?prodID=22363
http://www.redwolfairsoft.com/redwol...l?prodID=17549
http://www.redwolfairsoft.com/redwol...l?prodID=17378

If you like the rail+M4 stock one, there's a cheaper one on WGC as well that I couldn't find at the moment. It doesn't take 12g CO2 though. I think the STAR one without the rail is cheapest of the three. Not sure...

For the CA870 and Tanaka M870, all of those should be as simple as screwing on with the stock screw. The Maruzen M870 and M1100 are a LOT more difficult, since they can only use stocks with a gas system built in (unless you go external), while the CA870 can use any stock, gas system or not.

*edit, was it me who asked this question some time ago?
I was looking for stock solutions as well for the M1100 rev3 a while back. I found a ton of CA870 stocks, but very very few M870/M1100 ones.

**edit, here's that other M4 style stock:
http://www.wgcshop.com/pcart/shopper...C-391_srch_870
apparently this is the cheapest one. Just tug out the gas canister/hose and sell it to someone.

I saw all of those, but couldn't visualize how they would mount onto my shotty, bare with me I am a NEWBIE. But if you confirm they will work then I will be making a purchase as soon as I hear back.

By the way, I only need the stock, I have a rail already..

and THANK YOU for your reply buddy.

[tunabreath]

No problem. To mount them, look at the back of your shotty, about where the flap of skin between your thumb and index finger lays on the pistol grip. There should be a fairly large screw there. Take that out and the pistol grip should come right off. Put the replacement stock/grip combo in its place and replace the screw with the one provided with the stock.

IF IT DOES NOT FIT (different threading), then look at the length of the screw that comes with the new stock. If it's the same as the original one, then just use that. If it's longer (eg, the thumb-over full stock will have a much longer screw), then go down to your local hardware store and find a bolt of the same threading as the original one, and of the length (or longer and cut it down) as the new one.

Easy as pie, since you don't have a gas system to deal with

[rexdlu]

Niceee....you've just made me a happy man.

So do you have an opinion for who's got the best pricing and fast shipping out of the list you gave me?