Designated Marksmen Stock.

Taito · January 14th, 2008, 01:57

I'm currently working on a M16 designated marksmen rifle using Madbull's JP Rifles/Viking Tactical 12" front end and am in the market for a good stock. I'm currently looking at G&P Knight's Type G&P M16 Knight's Type Sniper Stock. It has an adjustable length of pull, and dosen't look too radical. I was wondering if anybody had any experience with it as I'm looking to fit a 8.4v 3600mAh large battery in it. It says it's rated to a 9.6v 3300mAh, but the traverse 7th battery on a 8.4v pack is wider than the 7th and 8th packs on a 9.6V. Should I risk getting it or play it safe and sick with a standard M16A2 stock? An few additional options I was thining of were using a Crane stock similar to G&P's SPR/A or routing the wiring forward to a PEQ box and using a 6 position tube stock with Command Arm's M4 stock and adjustable cheek rest.

Any opinions would be appreciated,
Vic.

Lakonian · January 14th, 2008, 02:38

Not a fan of CAA... LMT all the way. Can't beat that LMT feel.

Murdoch · January 14th, 2008, 02:55

I'm working on a similar project... SPR Mk12 Mod0
I'm using a G&P full stock simply because it was available right away. Here's what the arse end looks like:

It fits my 8.4V 3600mAh no problem and could probably fit another cell easily. I rather like that adjustable sniper stock you linked to. Has the benefit of large capacity and adjustable length if you have longer monkey arms like me... I would stay away from crane or other similar adjustable stocks (despite how sexy they look) simply because you have to buy crane stock batteries; and the extra wear and tear of sliding the stock could cause a wire short.

But hey, this is airsoft, so you have to pick something you like and run with it.

BTW, Here's Illusions build of the same rifle...

http://www.airsoftcanada.com/showthr...&highlight=spr

TokyoSeven · January 14th, 2008, 02:59

Ive always been a fan of the Right sniper stock. Unfortunetly, everyone Ive ever spoken to, or any review Ive ever read has stated that the stock is garbage, badly put together, screw holes strip and just its just plain shity. Its a shame that it has to be like that cause its a nice stock.

Beazer · January 14th, 2008, 03:09

Either go with the new knight stock, since it has an adjustable ass.
OR
buy the replica VLTOR fullstock.

Taito · January 14th, 2008, 03:12

The Right Sniper Stock looks a lot like what is on Leon's gun from the film "Leon" also known as "The Professional," which was a movie that I really enjoyed. I'm leaning myself towards the KAC as it comes with a QD sling swivel, is adjustable for my monkey arms (I know what you mean Murdoch), and the M16 that I used for my marksmen qualification felt rather comfortable.

TokyoSeven · January 14th, 2008, 03:15

I love the stock but its build is crap, the best thing I managed to find was instructions on how to build my own. Which Ive just been to lazy to do.

Yuu · January 14th, 2008, 03:35

Crane stock is the most conformable stock I have ever used fits softly on your cheeks. The one I used was from Trigger Happy.

Skruface · January 14th, 2008, 09:48

Magpul PRS stock for teh win.

SEALs · January 14th, 2008, 12:47

beat me to it skruface, magpul stock are the best and the sexiest looking stock around.

Cassius · January 14th, 2008, 12:47

I'd go with a Hurricane HK417 stock simply because it holds a large battery and has a telephone cord styled wire so I can extand or retract the stock with no problems.

Taito · January 14th, 2008, 18:51

How would one get a PRS? I know ebaybanned stopped having them on their website, so the clone is unavailable. Also, with that stock, I would have to run either a PEQ or a ready mag battery system as I would not want to damage the stock if I had to get a real steel version. Any thoughts on this? Also, if I was spending that much money, CAA's line of sniping stocks would be an option.

eel one · January 14th, 2008, 19:22

I would go for a ACE skeleton stock type. LandArms make one that will hold up to 10.8v, 1500mAh. You can see it on the madbull airsoft site under JP-rifles 12" handguard, second row right column.

For a dedicated marksman rifle, why would you need 3600mAh? That is more that I use in a month on my assault rifle, not conserving ammunition.

Taito · January 14th, 2008, 19:35

Quote:

Originally Posted by eel one

For a dedicated marksman rifle, why would you need 3600mAh? That is more that I use in a month on my assault rifle, not conserving ammunition.

They just happen to be the batteries that I have, outside of the 5 G&P 8.4v 1.1Ahs. Nice AEG, Eeel One, how does that stock feel?

eel one · January 14th, 2008, 19:49

The stock feels super sweet. The foam on the top tube is pleasant to put your chin on while aiming even in cold weather. To be honest I did experience a problem with the the tubes not being rock solid and they dis twist a little bit. But gluing the pivot points seems to keep the tubes in place and prevent them form twisting so I have have a very solid stock.
The skeletonized design really lightens the overall picture of the gun which measures over 3 feet in length

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

View Poll Results: Which stock would you suggest?
G&P Knight's Type Sniper Stock	9	11.11%
Standard M16A2 Stock	25	30.86%
Crane(LMT) Stock	31	38.27%
Command Arms 6 Position Stock w/ Adjustable Cheek Rest	16	19.75%
Voters: 81. You may not vote on this poll

January 14th, 2008, 01:57	#1
Taito Trader rating Join Date: Sep 2007 Location: Virginia, USA	Designated Marksmen Stock. I'm currently working on a M16 designated marksmen rifle using Madbull's JP Rifles/Viking Tactical 12" front end and am in the market for a good stock. I'm currently looking at G&P Knight's Type G&P M16 Knight's Type Sniper Stock. It has an adjustable length of pull, and dosen't look too radical. I was wondering if anybody had any experience with it as I'm looking to fit a 8.4v 3600mAh large battery in it. It says it's rated to a 9.6v 3300mAh, but the traverse 7th battery on a 8.4v pack is wider than the 7th and 8th packs on a 9.6V. Should I risk getting it or play it safe and sick with a standard M16A2 stock? An few additional options I was thining of were using a Crane stock similar to G&P's SPR/A or routing the wiring forward to a PEQ box and using a 6 position tube stock with Command Arm's M4 stock and adjustable cheek rest. Any opinions would be appreciated, Vic.

January 14th, 2008, 02:55	#3
Murdoch Trader rating Join Date: May 2006 Location: Scarborough, Ont.	I'm working on a similar project... SPR Mk12 Mod0 I'm using a G&P full stock simply because it was available right away. Here's what the arse end looks like: It fits my 8.4V 3600mAh no problem and could probably fit another cell easily. I rather like that adjustable sniper stock you linked to. Has the benefit of large capacity and adjustable length if you have longer monkey arms like me... I would stay away from crane or other similar adjustable stocks (despite how sexy they look) simply because you have to buy crane stock batteries; and the extra wear and tear of sliding the stock could cause a wire short. But hey, this is airsoft, so you have to pick something you like and run with it. BTW, Here's Illusions build of the same rifle... http://www.airsoftcanada.com/showthr...&highlight=spr Last edited by Murdoch; January 14th, 2008 at 03:37..

January 14th, 2008, 02:38	#2
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Not a fan of CAA... LMT all the way. Can't beat that LMT feel.

January 14th, 2008, 02:59	#4
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	Ive always been a fan of the Right sniper stock. Unfortunetly, everyone Ive ever spoken to, or any review Ive ever read has stated that the stock is garbage, badly put together, screw holes strip and just its just plain shity. Its a shame that it has to be like that cause its a nice stock. __________________ "Its only a little bit on fire"

January 14th, 2008, 03:09	#5
Beazer Trader rating Join Date: Jul 2006 Location: Calgary	Either go with the new knight stock, since it has an adjustable ass. OR buy the replica VLTOR fullstock.

January 14th, 2008, 03:12	#6
Taito Trader rating Join Date: Sep 2007 Location: Virginia, USA	The Right Sniper Stock looks a lot like what is on Leon's gun from the film "Leon" also known as "The Professional," which was a movie that I really enjoyed. I'm leaning myself towards the KAC as it comes with a QD sling swivel, is adjustable for my monkey arms (I know what you mean Murdoch), and the M16 that I used for my marksmen qualification felt rather comfortable.

January 14th, 2008, 03:15	#7
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	I love the stock but its build is crap, the best thing I managed to find was instructions on how to build my own. Which Ive just been to lazy to do. __________________ "Its only a little bit on fire"

January 14th, 2008, 12:47	#10
SEALs Trader rating Join Date: Dec 2001 Location: Watchin' your 6.	beat me to it skruface, magpul stock are the best and the sexiest looking stock around. __________________ If you're short of everything except enemies, you're in combat. D.O.W. SEALs Father of fear, reckless and widowmaker

January 14th, 2008, 12:47	#11
Cassius Trader rating Join Date: Mar 2006 Location: Montreal, Canada	I'd go with a Hurricane HK417 stock simply because it holds a large battery and has a telephone cord styled wire so I can extand or retract the stock with no problems. __________________ WE AIN'T DEAD

January 14th, 2008, 18:51	#12
Taito Trader rating Join Date: Sep 2007 Location: Virginia, USA	How would one get a PRS? I know ebaybanned stopped having them on their website, so the clone is unavailable. Also, with that stock, I would have to run either a PEQ or a ready mag battery system as I would not want to damage the stock if I had to get a real steel version. Any thoughts on this? Also, if I was spending that much money, CAA's line of sniping stocks would be an option.

January 14th, 2008, 19:22	#13
eel one Trader rating Join Date: Sep 2004 Location: Denmark	I would go for a ACE skeleton stock type. LandArms make one that will hold up to 10.8v, 1500mAh. You can see it on the madbull airsoft site under JP-rifles 12" handguard, second row right column. For a dedicated marksman rifle, why would you need 3600mAh? That is more that I use in a month on my assault rifle, not conserving ammunition. __________________

January 14th, 2008, 19:49	#15
eel one Trader rating Join Date: Sep 2004 Location: Denmark	The stock feels super sweet. The foam on the top tube is pleasant to put your chin on while aiming even in cold weather. To be honest I did experience a problem with the the tubes not being rock solid and they dis twist a little bit. But gluing the pivot points seems to keep the tubes in place and prevent them form twisting so I have have a very solid stock. The skeletonized design really lightens the overall picture of the gun which measures over 3 feet in length __________________

Designated Marksmen Stock.

Upgrades & Modifications