[Advice] APS Type 96 barrel in a CA36K?

takatorikku · October 25th, 2006, 23:21

Well, I finally remembered about my butchered type 96 parts in the box and I thought to myself, "Wait a tic, could I fit that longer inner barrel into my CA36K?"

Granted, the CA36 has a much shorter barrel (355mm compared to the 96's 500mm) but that's what a silencer or maybe the full size barrel are for.

My questions is: Would it be worth putting the barrel in? I've done a lot of Google and forum searches for the stock inner barrel diameter for the 96 but so far haven't found anything so I'm guessing that's it's 6.08mm. Still, the added length would be an improvement over 355mm right? I also know that I'll probably need to buy a better cylinder (ported?), spring, spring guide etc, but would it be worth it? From what I've read about too much backpressure, would cutting the barrel shorter be a good/disastrous idea?

Now all I need to do is find a guide on how to change barrels... If I do decide to do this, I'll remember to take pics and write it up because I don't think I've seen this posted here on ASC before, and if it has, then oh well, darn.

Any information or scoldings would be appreciated

SKI · October 25th, 2006, 23:36

The 96 has a completely different barrel than an AEG. They are not compatable from what I understand. In order to put an AEG barrel into the 96, you need to use the PDI hopup so I guess the reverse would be true.

takatorikku · October 26th, 2006, 17:14

hmm, looks like this will turn out to be a nice project! thanks SKI!

PS: any type 96 users know the diameter of the inner barrel?

moto · October 26th, 2006, 18:08

Quote:

Originally Posted by SKI

The 96 has a completely different barrel than an AEG. They are not compatable from what I understand. In order to put an AEG barrel into the 96, you need to use the PDI hopup so I guess the reverse would be true.

Yup. Ill have to second that. The stock type96 barrel is defferent then the standard AEG style and wont fit into an AEG hopup. Stock barrel bore is 6.08 if memory serves.

Spitfire · October 27th, 2006, 08:19

6.08 is right ;-)

Trader rating · October 27th, 2006, 14:48

youd need to replace your cylinder also

Skruface · October 27th, 2006, 18:53

Hell, you can do anything with enough money. I once put a 1.8 intercooled turbo from an '88 Madza 323 GTX in my '91 Escort GT. With the right motivation and plenty of cash anything is possible.

If you really want a longer barrel, get a Systema 6.04 brass tightbore for a TM SIG550.....that's 534mm. I have one in my TM AK.

takatorikku · October 27th, 2006, 19:52

i've checked around and i can put an M4/550 363 barrel in no problem. it's only a 10mm ish difference. bit pricey tho.

Skruface: I know what you mean, my cousin frankinstien'd an SR20DET into his puny integra. why he didn't buy a 240sx and convert it to a silvia with the same money, i'll never know... maybe he just likes the looks of integras?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 25th, 2006, 23:21	#1
takatorikku UnVerified Trader rating Join Date: Sep 2006	[Need Advice] APS Type 96 barrel in a CA36K? Well, I finally remembered about my butchered type 96 parts in the box and I thought to myself, "Wait a tic, could I fit that longer inner barrel into my CA36K?" Granted, the CA36 has a much shorter barrel (355mm compared to the 96's 500mm) but that's what a silencer or maybe the full size barrel are for. My questions is: Would it be worth putting the barrel in? I've done a lot of Google and forum searches for the stock inner barrel diameter for the 96 but so far haven't found anything so I'm guessing that's it's 6.08mm. Still, the added length would be an improvement over 355mm right? I also know that I'll probably need to buy a better cylinder (ported?), spring, spring guide etc, but would it be worth it? From what I've read about too much backpressure, would cutting the barrel shorter be a good/disastrous idea? Now all I need to do is find a guide on how to change barrels... If I do decide to do this, I'll remember to take pics and write it up because I don't think I've seen this posted here on ASC before, and if it has, then oh well, darn. Any information or scoldings would be appreciated __________________ Last edited by takatorikku; October 25th, 2006 at 23:34..

October 25th, 2006, 23:36	#2
SKI Trader rating Join Date: Oct 2002 Location: Mississauga	The 96 has a completely different barrel than an AEG. They are not compatable from what I understand. In order to put an AEG barrel into the 96, you need to use the PDI hopup so I guess the reverse would be true. __________________ www.ctmotorsports.ca

October 26th, 2006, 17:14	#3
takatorikku UnVerified Trader rating Join Date: Sep 2006	hmm, looks like this will turn out to be a nice project! thanks SKI! PS: any type 96 users know the diameter of the inner barrel? __________________

October 27th, 2006, 08:19	#5
Spitfire Trader rating Join Date: Dec 2005 Location: Switzerland	6.08 is right ;-)

October 27th, 2006, 14:48	#6
Droc Guest Trader rating	youd need to replace your cylinder also

October 27th, 2006, 19:52	#8
takatorikku UnVerified Trader rating Join Date: Sep 2006	i've checked around and i can put an M4/550 363 barrel in no problem. it's only a 10mm ish difference. bit pricey tho. Skruface: I know what you mean, my cousin frankinstien'd an SR20DET into his puny integra. why he didn't buy a 240sx and convert it to a silvia with the same money, i'll never know... maybe he just likes the looks of integras? __________________

[Advice] APS Type 96 barrel in a CA36K?

Upgrades & Modifications