|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
November 19th, 2019, 14:51
|
#1 |
|
G&G UMP Hop Up Unit
I have a G&G UMP that has a P* Jack engine in it and I am looking to upgrade the barrel and hop up unit (currently both stock).
As it used a V3 gearbox, would an AK hop up unit be the one to get? I'm not familiar with the AK hop up unit as I have only had M4 platforms before, but the slide adjustment appears to be the same as what the UMP uses. Thanks in advance!
__________________
I'd like to offer you moral support, but I have questionable morals! |
|
|
|
November 19th, 2019, 15:54
|
#2 |
|
It’s proprietary to the umg body. It’s a fine hopup unit. Just plunk in a good rubber if your factory green one is worn out.
__________________
Looking to get age verified in York region? Click link... |
|
|
|
|
November 19th, 2019, 16:16
|
#3 |
|
|
Awesome! Thanks for the quick reply.
__________________
I'd like to offer you moral support, but I have questionable morals! |
|
|
|
|
November 19th, 2019, 18:34
|
#4 |
|
I owned a G&G UMP before and the only problem i had with the hop-up was that it would reset itself while firing because the slide ajustment was loose. I solved the problem by putting something behind the slide adjustment to prevent it from going farther back so keep a eye on that
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
