|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 2nd, 2014, 20:51 | #1 |
Whiny Attention Whore
|
What Motor for my set-up?
Is a nut shell, I want too run a m120 With my brand new Built gearbox.
Its for a DMR M4 build, and ill need a long shaft. Im running 9.6 1600 MAH Batts. Not switching too lipo. My current Stock G@G motor cant pull a m120. And help would be great.
__________________
B.A. Level 3 Cert. |
February 2nd, 2014, 21:20 | #2 |
Get a guarder infinite torque motor
It can pull up to a m170 spring no problem I use one in my g&g m16 on 9.6 and it has a decent rate of fire aswell |
|
February 2nd, 2014, 21:38 | #3 |
Privateer Airsoft
|
SHS or JG/E1/GE high torque if you're budget conscious.
Lonex A2 or Guarder Infinite if you want a bit more gucci.
__________________
I change primaries like other people change socks. |
February 2nd, 2014, 21:50 | #4 |
The important word here is "Neodymium". They're a kind of magnets. You want them, trust us.
Spike gave good advice, but no matter the motor, get something with good magnets. |
|
February 2nd, 2014, 23:06 | #5 |
+1 to that. And if you ever burn it out, you can swap the arm from the g&g stock motor into the neo can & make a frankentorque motor. The g&g ferrite motors have a pretty high wind count just looking at them visually.
|
|
February 2nd, 2014, 23:51 | #6 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
|
February 3rd, 2014, 01:18 | #7 |
Squid Porn Superstar, I love the tentacles!
|
I bought a Tienly GT45000, it gave me a boner and made all 4 of my Lonex A1s feel slow.
Last edited by pestobanana; February 3rd, 2014 at 01:37.. |
February 3rd, 2014, 01:59 | #8 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
^ YES
Don't even need to take one apart and I know they are the tits. |
February 3rd, 2014, 10:16 | #9 |
"bb bukakke" KING!
|
the pricing on the guarder ITU is not worth it unless you're ordering from asia. And at that point, I'd rather buy the tienly if you're looking at the high end. Lonex motors are my go to motor for any build.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
February 3rd, 2014, 10:50 | #10 |
JG Blue if you can find them are awesome. Otherwise you could grab a Lonex one from AirsoftStore if you want fast shipping.
__________________
ಠ_ಠLess QQ more Pew Pew READY TO >> RACE |
|
February 3rd, 2014, 15:13 | #11 |
Squid Porn Superstar, I love the tentacles!
|
My experience with the Guarder ITU is that it kinda sucks for the price, Lonex motors are cheaper and better.
|
February 3rd, 2014, 16:51 | #12 |
"bb bukakke" KING!
|
well wgc has the itu for 39... the going rate for a lonex is closer to 50... I agree for the 10$ difference the lonex is the better choice. But some people care about not spending 10$ more.
Where it gets really bad is that some parts places in canada are selling the itu for in excess of 80$. I would definitely rather buy a tienly and ship it from asia for that price.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
February 3rd, 2014, 19:57 | #13 |
Infinity is too much torque
__________________
Stabface Custom Embroidery Name Tapes Team Patches Hats Custom Embroidery www.stabface.ca |
|
February 3rd, 2014, 20:15 | #14 |
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
^not if you're airsofting 10yrs ago and using an 8.4v mini battery to run a 470fps spring lol
rrrrrRRRRRRRRRREEEEEEEEE THWAP! |
February 3rd, 2014, 20:23 | #15 |
You can never have too much torque.
|
|
|
Bookmarks |
Thread Tools | |
|
|