|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
August 30th, 2005, 10:47
|
#1 |
|
I'm planing on upgrading to a marksman rifle
I've decuded that I want a marksmen rifle. I plan on using the new CA36 as my base, and then upgrade it to make it more precise.
Here's my planed upgrade list based on the input guys from a diferent forum have submited, I'm just looking for a second opinion on it: Systema helical Enfini torque up gearset-piston included(over-kill but what the hey) Systema M130 spring Systema V3 spring guide w/ bearing Systema V3 silent head set new Hop-up buking KM TN barrel Maybe a Systema super torque-up motor (If I ever find out the shaft length of the CA36!) Is there anything you guys think I left out? And I hear that CA gun are not good for precision shooting. Why is CA not good for this? I know their hop-up isn't the best but I'll be replacing that and a lot of other things. |
|
|
|
|
August 30th, 2005, 11:02
|
#2 |
|
Official ASC Bladesmith
|
Maybe a 9.6V or higher battery to reduce the time between the trigger pull and the piston release, and definitely as high a mAh battery as you can find since your are putting in a reasonably heafty spring.
|
|
|
|
|
August 31st, 2005, 12:02
|
#3 |
|
I wouldn't use an m130, thats for sure.... go with a PDI 170, or a TOP 190. Better springs, easier to compress, easier on batteries and mechboxes.
__________________
“You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
