|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 7th, 2013, 17:11 | #1 |
SVD Scope Trouble
Hello,
I bought a knock-off SVD AEG and a PSO-1 Scope I put the scope on and it got stuck on the rail. It is in the incorrect position (because it is wobbling and not far enough ahead) Now I cannot take it off. I used this same scope on a Real Sword SVD a few years ago and I remember encountering a similar problem but I don't know how I got the scope off. When I first attempted putting the scope on the rail I think I put it on too far back and it is being blocked somewhere I can't see. Any suggestions? I can attach photos if that helps |
|
March 7th, 2013, 17:14 | #2 |
Loves Furries
|
rubber mallet.
there are different types of ak side mounts.
__________________
If ASC were real life, there would be no Chuck Norris, only CDN_Stalker MANITOBA IVAN |
March 7th, 2013, 17:17 | #3 |
The rail looks very similar compared to the RS SVD I had
I bought a CYMA SVD Where it is stuck there shouldn't be anything holding it there EDIT: Here is a photo of where the scope is stuck - at the first gap http://airsoftdepot.ca/catalog/images/cymaSVD-1.gif EDIT: I think this part is blocking it from moving, does anyone know what kind of tool can be used here? http://img834.imageshack.us/img834/8455/photofnh.jpg Last edited by Eul0gy; March 7th, 2013 at 17:30.. |
|
|
Bookmarks |
Thread Tools | |
|
|