something clanging in my high capa magazine

[solidgear34]

i got a hellfire high capa recently and after some use i noticed theres clanging in the magazine. i tried to open the magazine but it appears the screwes to open the bottom of the magazines were stripped. anyone got any idea what that clanging is and is there any way to take out the stripped screw?

[venture]

probably a copper tube that was attached to the fill valve.

[solidgear34]

any way to fix that? like how do i get rid of a stripped screw out ?

[venture]

Most magazines have 2 pins that you can knock out and take the bottom right off.

[solidgear34]

nope this one is just a screw

[solidgear34]

nvm fixed! thanks guys!

[HKGhost]

Remove the bottom screw and the lower section will come off from the body. The fill valve tube might have came off and is rattling inside.

[solidgear34]

yup it was the valve tube. i stuck it and kinda mallet it back in tight. should i glue it?

[coach]

A dab of crazy glue would work

[Styrak]

For a stripped screw, you can either use a dremel and cut a slot in the screw then use a flat head screwdriver, or if it's recessed or you just want to do it a different way you can use a stripped screw remover which is a special tool.