Stripped threads on body pins

Specs · December 1st, 2010, 14:19

The front receiver pin on my CA M15A4 SPR is stripped and I cant get the body pin out. I was wondering if anybody knew how I could fix this... sorry for the noob question but I've never encountered this problem but the metal is just so crappy.

Thanks

Crunchmeister · December 1st, 2010, 14:35

Well, you could always buy new body pins. They're quite cheap.

Shell Shock · December 1st, 2010, 15:04

besides buying new pin set, all you can do is re-bore the holes and compensate? first option being the easiest and most cost efficient

Specs · December 1st, 2010, 15:34

I cant get the body pins out, the screws are in the pins and the pins are in the body ...sorry I left that out.

baker_Jeff · December 1st, 2010, 15:39

Ouch... you'll probably have to drill them out then.

cooney · December 1st, 2010, 15:39

Do you have the Classic army X series? If so, you just push the body pins harder.

Specs · December 1st, 2010, 15:42

Quote:

Originally Posted by baker_Jeff

Ouch... you'll probably have to drill them out then.

FML I dont have a drill

H1TMAN · December 1st, 2010, 15:52

If, you have the older screw type body pins just use a metal saw and cut a groove into the screw head and then use a flat head screwdriver to unscrew the screw.

Specs · December 1st, 2010, 16:02

Quote:

Originally Posted by H1TMAN

If, you have the older screw type body pins just use a metal saw and cut a groove into the screw head and then use a flat head screwdriver to unscrew the screw.

Thats a good idea, ill try that

ThunderCactus · December 1st, 2010, 16:59

Get a mastercraft screw extractor set, they work fantastic

Shell Shock · December 1st, 2010, 20:10

Quote:

Originally Posted by ThunderCactus

Get a mastercraft screw extractor set, they work fantastic

how much those going for anyways?

ThunderCactus · December 1st, 2010, 22:33

35$ apparently
http://www.canadiantire.ca/AST/brows....jsp?locale=en

Specs · December 1st, 2010, 22:43

Looks like I may have to look into one of those... Thanks Cactus!

TokyoSeven · December 2nd, 2010, 09:29

I used a dremel and made a new groove when this happened to me....and then when that didnt work I just ground the fucking thing right off and put a new one in.

Shell Shock · December 2nd, 2010, 12:25

Quote:

Originally Posted by ThunderCactus

35$ apparently
http://www.canadiantire.ca/AST/brows....jsp?locale=en

nice, thanks for the info. Need to pick up a set.

Quote:

Originally Posted by TokyoSeven

I used a dremel and made a new groove when this happened to me....and then when that didnt work I just ground the fucking thing right off and put a new one in.

also good. Though i would be worried bout fuskin up the body.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 1st, 2010, 14:19	#1
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	Stripped threads on body pins The front receiver pin on my CA M15A4 SPR is stripped and I cant get the body pin out. I was wondering if anybody knew how I could fix this... sorry for the noob question but I've never encountered this problem but the metal is just so crappy. Thanks Last edited by Specs; December 1st, 2010 at 15:35..

December 1st, 2010, 14:35	#2
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Well, you could always buy new body pins. They're quite cheap. __________________

December 1st, 2010, 15:04	#3
Shell Shock Trader rating Join Date: Oct 2010 Location: eastern outpost f3,j9 (mississauga, on)	besides buying new pin set, all you can do is re-bore the holes and compensate? first option being the easiest and most cost efficient __________________ 2-Bit Photographer

December 1st, 2010, 15:34	#4
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	I cant get the body pins out, the screws are in the pins and the pins are in the body ...sorry I left that out.

December 1st, 2010, 15:39	#5
baker_Jeff Trader rating Join Date: May 2008 Location: Edmonton, AB	Ouch... you'll probably have to drill them out then. __________________ Founder of Capital Airsoft in Edmonton Out of the Game 04/22/16

December 1st, 2010, 15:39	#6
cooney Trader rating Join Date: Sep 2007 Location: Hamilton, Ontario	Do you have the Classic army X series? If so, you just push the body pins harder.

December 1st, 2010, 15:52	#8
H1TMAN formerly GRoy Trader rating Join Date: Dec 2008 Location: Angus, ON	If, you have the older screw type body pins just use a metal saw and cut a groove into the screw head and then use a flat head screwdriver to unscrew the screw.

December 1st, 2010, 16:59	#10
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Get a mastercraft screw extractor set, they work fantastic

December 1st, 2010, 22:33	#12
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	35$ apparently http://www.canadiantire.ca/AST/brows....jsp?locale=en

December 1st, 2010, 22:43	#13
Specs Trader rating Join Date: Dec 2007 Location: Victoria City	Looks like I may have to look into one of those... Thanks Cactus!

December 2nd, 2010, 09:29	#14
TokyoSeven Red Wine & Adderall Trader rating Join Date: Oct 2005 Location: Saskatoon, SK	I used a dremel and made a new groove when this happened to me....and then when that didnt work I just ground the fucking thing right off and put a new one in. __________________ "Its only a little bit on fire"

Stripped threads on body pins

Doctor's Corner