ak74u help

[sarosh]

hey so i just got a cyma ak74u and i have a couple of questions for any of you guys with experience with these.

1. is this stock compatable for it?
http://shop.ehobbyasia.com/gandd-mk1...eries-aeg.html
they say its out of stock but im hoping mabey they will get more.
its a Dboys 74 stock but i hear the Dboys and Cyma ak74u are pretty compatable with one another.

2. im looking to add this silencer
http://www.airsoftparts.ca/store2/in...roducts_id=373
i need an inner barrel and not sure on the length? would it be easiest to go with a 229mm as an extra 30 to make it go to the end of the silencer would be harder to find?

3. im looking for ris/ras handgaurd for it does anyone know where i can find one i thought there was one on ehobby but i must keep missing it.

thanks for all the help;

[sarosh]

found this one
http://www.redwolfairsoft.com/redwol...G552_247mm.htm

[pusangani]

The Dboys stock won't work, pretty sure they're not compatible, I know the replacement Dboys AKS74 stock doesn't fit Cymas

The inner barrel doesn't have to go to the end of the suppressor, but you will have to make sure it's shimmed properly inside so that it stays centered

[sarosh]

k thanks....is there any way to get an m4 stock onto the back of the 74u? somee type of adaptor?

[pusangani]

never wanted to do anything liek that, sorry can't help you there hehe

[who101]

could get one of these
http://www.007airsoft.com/products/p...ages/10317.jpg
::edit:: wrong link heres the other one
http://www.007airsoft.com/products/p...ages/10318.jpg
they are here
http://www.007airsoft.com/products/htm/aeg-src-ak.htm

[Styrak]

First of all that's not an M4 stock, and I'm pretty sure he doesn't want to buy a new gun.

[AS92-RD]

Originally Posted by Styrak

First of all that's not an M4 stock, and I'm pretty sure he doesn't want to buy a new gun.

Hell, that's not even an individual part.

Here's a quick glance at what it'd look like:
http://www.fab-defense.com/en/catego...for-ak-47.html

I don't think I've seen a mod like that on an airsoft gun. But the greatest adaptor of all is duct tape

[Cobrajr122]

Originally Posted by AS92-RD

But the greatest adaptor of all is duct tape

Electrical tape with thread seal tape on top, SO much better.

[AS92-RD]

Originally Posted by Cobrajr122

Electrical tape with thread seal tape on top, SO much better.

I stand corrected

[pusangani]

Originally Posted by who101

could get one of these
http://www.007airsoft.com/products/p...ages/10317.jpg
http://www.007airsoft.com/products/p...ages/10317.jpg

they are here
http://www.007airsoft.com/products/htm/aeg-src-ak.htm

He's looking for accessories for his AKS74U, wtf does this post have to do with that?

[northcop]

pretty good tactical front set for that, G&P makes pretty solid parts.


http://www.airsoftparts.ca/store2/in...oducts_id=1432

[Styrak]

Why is there so much fail in this thread?

That's an AK47 handguard set. Won't work.

[who101]

my bad
both of them are the same here is the other one
http://www.007airsoft.com/products/p...ages/10318.jpg

[AS92-RD]

Originally Posted by who101

my bad
both of them are the same here is the other one
http://www.007airsoft.com/products/p...ages/10318.jpg

Well, that's a surprise but I don't think he wants a whole gun. I can't find a crane stock on it's own though. That will take some hefty looking.