|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 26th, 2011, 20:38
|
#856 |
|
Velocity arms is now selling it.
http://www.torontoairsoft.com/produc...d_product=1243 |
|
|
|
June 26th, 2011, 21:51
|
#857 | |
|
would this be the proper place to ask about a comparison for the M4/416 between:
- closed chamber + VSZ hop/barrel - Open chamber conversion wondering accuracy, gas usage, consitancy and general wear and tear. this is for outdoor use... pretty much all semi auto...
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
|
|
|
|
|
June 27th, 2011, 00:22
|
#858 | |
|
a.k.a. cloaked
|
Quote:
|
|
|
|
|
|
June 28th, 2011, 22:42
|
#859 |
|
|
I believe we all are waiting for that.
|
|
|
|
|
June 28th, 2011, 23:33
|
#860 | |
|
|
I only ask cause I just came into possession of an HK416 ... and I'm going VN mag route .. which means changing over to closed bolt tops (I happen to have a friend that just did a swap over to open bolt on all his mags, so he's got a bunch laying around if I want em) ... but as we all know the closed hop up blows goats ... I've done the trim mod to the rubber, will see how much of a difference that makes this weekend hopefully ...
kinda thinking just go for it with an open bolt kit ... less BS with having to switch over 10 or so mags...etc...
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
|
|
|
|
|
June 29th, 2011, 12:53
|
#861 | |
|
Reckless, glad we could work most of the kinks out of this yesterday. I haven't seen a WE sold on asc yet that didn't have something broken or mashed on it, go figure.
For everyone in asc-land. Just curious if the nozzle on the m4/hk416/pdw and scar are the same. Reckless and I installed an npas from my pdw on his hk416 (just the nozzle, not the shaft or anything else, those were obviously different). They look to be the exact same (except for the npas part) but the gun had very slow fps when fired. Was wondering if it's that the npas is just set low, wouldn't know as I've never really used it myself. Or if the PDW nozzle is somehow different and incompatible. Can probably figure this out on my own, but thought I'd ask here while I'm looking Also anyone know where to get replacement springs that go on the nozzle on a pdw open bolt. After gaming I noticed that it was screwed up, it's actually shorter now so it still works flawlessly, but I'd still like to replace it in the near future Thanks in advance Quote:
__________________
Friendly Fire...... ISN'T!! |
|
|
|
|
|
July 10th, 2011, 20:29
|
#862 |
|
looking to for the name of the tool that will help take the NPAS apart to use with the TSC rod. i have needle nose but they don't fit in there
__________________
|
|
|
|
|
July 10th, 2011, 20:41
|
#863 |
|
Tys
|
spring clip...e-clip...snap on pliers (they go by different names/lables). Got mine at Home Depot or Rona...comes with straight or L-shaped tips of different material/sizes. Can be reversed so that squeezing grip will either clamp or spread the tines.
|
|
|
|
|
July 10th, 2011, 20:50
|
#864 |
|
|
thank you Ty
__________________
|
|
|
|
|
July 10th, 2011, 23:54
|
#865 |
|
|
Snap Ring Pliers. For what you need a harbor freight/princess auto would be a cheaper route.
|
|
|
|
|
July 11th, 2011, 00:50
|
#866 |
|
I use my teeth.
__________________
|
|
|
|
|
July 12th, 2011, 13:54
|
#867 |
|
|
ok i just got my falcon vs-z in nd i'm trying to figure out how to get part #114 the inner barrel nut off but the little pin that holding it place won't move. i have limit tools so no bench vice grip thing a bob
__________________
|
|
|
|
|
July 12th, 2011, 14:14
|
#868 |
|
Tys
|
You need to punch that pin out. Put it in a vice...or something to hold it still.
Use a steel punch (or a nail with the tip ground off) and give it a good whack. If it doesn't budge...try from the other side. Some are loose enough to just fall out...others need "convincing" |
|
|
|
|
July 12th, 2011, 14:19
|
#869 |
|
|
thanks ty. i use a channel lock pliers with a towel my legs to hold it close and hammer punch out it. put it on the falcon. now will test it out at tonight's game
__________________
Last edited by Sandrock; July 12th, 2011 at 16:39.. Reason: bad spelling |
|
|
|
|
July 12th, 2011, 14:25
|
#870 |
|
Tys
|
falcon punch it!
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
