|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 26th, 2011, 22:42 | #736 | |
Suburban Gun Runner
|
Have you tried a different mag?
__________________
Quote:
|
|
March 26th, 2011, 22:43 | #737 |
What kind of BBs' are you using?
|
|
March 26th, 2011, 22:51 | #738 |
Yes, I tried both my M4 mags.. no go.. Im using 0.30g bastards. Disassembled and reassembled the hop up unit several times.
|
|
March 26th, 2011, 22:59 | #739 |
I'd stick the original barrel back in and start from scratch. The hop up rubber is no where long enough to hold 4 bbs in there, so I would assume there's something wrong with the barrel itself.
|
|
March 27th, 2011, 00:20 | #740 |
Yeah, im going to try with the stock inner barrel, but I would much prefer to use the RA TECH one... it worked twice before, but failed to work for the other 6 times when assembled/disassembled the hop up
|
|
March 27th, 2011, 02:14 | #741 | |
Quote:
|
||
March 27th, 2011, 12:40 | #742 |
I think the issue is a diameter problem, not length. the tip of the npas needs to be a hair thinner, not shorter.
__________________
|
|
March 27th, 2011, 14:10 | #743 |
March 27th, 2011, 14:19 | #744 |
if possible im going to change the nozzle and put the npas part into the original nozzle and see if that works
edit: i now have the npas valve in my original nozzle, so far it seems to have worked just dont have any gas left to test will update
__________________
Last edited by ebfud; March 27th, 2011 at 14:42.. |
|
March 27th, 2011, 19:40 | #745 |
Does anyone know the inner diameter of the RA tech and stock inner barrel? is it 6.01 or 6.03?
EDIT: my gun amazingly works with stock inner barrel, but not with RA tech inner barrel.. also, when i installed a shorter RA tech barrel compared to my longer stock inner barrel, FPS increases by like 30-40fps. So im guessing the RA tech barrel must be uber tight compared to stock |
|
March 28th, 2011, 12:59 | #746 |
* AV Suspended Pending Trade Dispute *
|
Anyone found out a solution or some kind of remedy to fix/prevent the back plate from exploding on a WE SCAR? Mine exploded the other day. I'm kind of bummed about that. It's a great GBBR otherwise
__________________
|
March 28th, 2011, 16:01 | #747 |
do a quick thread search if you havent already im sure its in here somewhere
|
|
March 28th, 2011, 16:16 | #748 |
you can add rubber to face of the recoil rod. You can do the pvc mod. Or you can wait until ratech releases the cnc'd part 66 and buy it. If you buy a replacement part 66, chances are it's the reinforced gen 3 part.
__________________
|
|
March 30th, 2011, 00:50 | #749 |
WE Open Bolt M16A1 final test Vid. (Open Bolt kit will be available)
http://www.youtube.com/watch?v=6xXMK...embedded#at=11 |
|
March 30th, 2011, 01:33 | #750 |
a.k.a. cloaked
|
I just came..
|
|
Bookmarks |
Thread Tools | |
|
|