Cybergun SIG 552

[Alphaj1]

I know silencers are iffy coming over the border, but can flash hiders pass through legally?

[[]D[][]\/[][]D]

Flash Hiders shouldn't be a problem. I ordered my TM Knight's Pro Silencer from AirsoftGlobal in Hong Kong and it went right through customs without a hitch.

[Alphaj1]

thanks man-so any flash hider 14mm (+/-) will fit?

[[]D[][]\/[][]D]

Only -14mm flash hiders will fit your Cybergun SIG 552 unless you get an - to + adapter.

[Alphaj1]

Well, here it is:

Pardon the quality, iphones only have 2.0 mp

IMG]http://i390.photobucket.com/albums/oo343/alphaj1/photo.jpg[/IMG]



not quite done yet-Still buying a flash hider and front grip

[[]D[][]\/[][]D]

Not bad, it looks good!

[Alphaj1]

thanks man, hopefully it holds up gamewise

[[]D[][]\/[][]D]

Did you have a hard time removing the trigger guard/mag release assembly from the lower receiver? Because I certainly did.

[Alphaj1]

ohh no we didnt dissasemble it. I taped up the important areas. It may be noobish, but it got the job done

[Alphaj1]

hold on, removing the flashider-is that unscrewing it clockwise with the gun facing you, or the gun aiming away from you? dumb question, just want to be sure

[The Lettonian]

Originally Posted by Harbinger of Darkness

The Cybergun Sig is just a re brand of the JG. They're both 100% TM compatible as they're TM clones.

Ok, so by "re-brand" you mean its just re-labeled and go? Internals and major components will all be on par quality-wise, right? This is what I gather from reading, but it never hurts to double-check.

Buddy of mine is looking at getting into the sport and wants a 552. But he's scottish so cheaper + effort in repairs = better than upfront cost. That being said, I know of a few JGs that have lasted for quite a while so after a slow painful disassembly, re-greasing and re-shimming, and possibly a couple of new parts in the mechbox, a Cybergun 552 should be pretty good reliability-wise??? Yes, I know cybergun isn't necessarly JG, but if one is just a re-breand of the other, you can kinda see my thought process on this.

[[]D[][]\/[][]D]

Originally Posted by Alphaj1

hold on, removing the flashider-is that unscrewing it clockwise with the gun facing you, or the gun aiming away from you? dumb question, just want to be sure

That's clockwise with the gun facing you.

[Alphaj1]

Originally Posted by FNG_13

Ok, so by "re-brand" you mean its just re-labeled and go? Internals and major components will all be on par quality-wise, right? This is what I gather from reading, but it never hurts to double-check.

Buddy of mine is looking at getting into the sport and wants a 552. But he's scottish so cheaper + effort in repairs = better than upfront cost. That being said, I know of a few JGs that have lasted for quite a while so after a slow painful disassembly, re-greasing and re-shimming, and possibly a couple of new parts in the mechbox, a Cybergun 552 should be pretty good reliability-wise??? Yes, I know cybergun isn't necessarly JG, but if one is just a re-breand of the other, you can kinda see my thought process on this.

look up threads on FOREST CITY SURPLUS
there is one particular post saying that the cybergun is just the same quality as the JG/TM. This came from a guy who owned a TM sig 552.

[Alphaj1]

Originally Posted by []D[][]\/[][]D

That's clockwise with the gun facing you.

thanks man, yeah i figured it out few days ago

[Alphaj1]

here you go; post number #85

http://www.airsoftcanada.com/showthr...sig+552&page=6