WIP: Upgrading Your Tokyo Marui Glock

[.Zo]

Fuck me haha

I took apart the hop-up on my 18c (TM) and cant put it back together

halp?

[.Zo]

Also how the frick do I take out the bbu

I cant wedge it out

[p.phresh]

Originally Posted by .Zo

Also how the frick do I take out the bbu

I cant wedge it out

remove the screw then the two pieces held in by the screw.
Turn the selector switch all the way up until it's facing the top of the slide and push it out gently.

*put your hand over top while you're popping out the selector switch, there's a tiny spring and detent pin you don't want to lose.

After that the BBU should fall right out.

[.Zo]

Originally Posted by p.phresh

remove the screw then the two pieces held in by the screw.
Turn the selector switch all the way up until it's facing the top of the slide and push it out gently.

*put your hand over top while you're popping out the selector switch, there's a tiny spring and detent pin you don't want to lose.

After that the BBU should fall right out.

Already took out the selector, the bbu seems to be in the slide pretty good. I CANNOT GET THIS BBU OUT FOR THE LIFE OF ME ARGH

filing down the outer barrel so the hop-up unit will slide in

I have the whole gun taken a part trying to fit it in this guarder frame and pgc slide/barrel haha

[.Zo]

This PGC outer barrel is really being a pain in the ass.

The hop up unit wont fit in it so now I have to file all this shit

[p.phresh]

You shouldn't have to file a PGC barrel to get a TM hop chamber to fit. You have to kinda massage it in there. Push it to the side and tap it in. Don't file anything you might ruin the way the inner and outer barrels interact.

here's a youtube video of lazouche removing and installing a metal 1911 outer barrel, the barrel assemblies are different but the ideas are the same:
LaZouche Custom airsoft how to fit metal outer barrels. - YouTube

[.Zo]

Originally Posted by p.phresh

You shouldn't have to file a PGC barrel to get a TM hop chamber to fit. You have to kinda massage it in there. Push it to the side and tap it in. Don't file anything you might ruin the way the inner and outer barrels interact.

here's a youtube video of lazouche removing and installing a metal 1911 outer barrel, the barrel assemblies are different but the ideas are the same:
LaZouche Custom airsoft how to fit metal outer barrels. - YouTube

I already filed it

I hope it works or I'll have to plead to pgc for a new one...

this whole project is making me frustrated and sad.

[.Zo]

I cant get the hop up unit to go to the line marked in the outer barrel

its like .5 cm from it, will this affect accuracy :s

[.Zo]

Oh and I just lost the slide stop spring.

Yay.

>.<

anyone know where I can get one?

[p.phresh]

Originally Posted by .Zo

Oh and I just lost the slide stop spring.

Yay.

>.<

anyone know where I can get one?

right in your own backyard:
http://www.evike.com/product_info.php?products_id=41151

or should you decide to lose more springs:
http://www.evike.com/product_info.php?products_id=30681

[.Zo]

Originally Posted by p.phresh

right in your own backyard:
http://www.evike.com/product_info.php?products_id=41151

or should you decide to lose more springs:
http://www.evike.com/product_info.php?products_id=30681

Sweeeeeeeet

Could you answer my last question :3

"I cant get the hop up unit to go to the line marked in the outer barrel

its like .5 cm from it, will this affect accuracy :s "

[e-luder]

Originally Posted by .Zo

This PGC outer barrel is really being a pain in the ass.

The hop up unit wont fit in it so now I have to file all this shit

It fits. It's just hard to get the hop up unit inside the chamber. The PGC outer Barrel is actually one of the best accommodating outer barrel out there for Glocks.

Sweeeeeeeet

Could you answer my last question :3

"I cant get the hop up unit to go to the line marked in the outer barrel

its like .5 cm from it, will this affect accuracy :s "

What is the "line marked" you are referring to?

Here's a video of the slide assembly take down on the G17. Fast Forward to the end. You kinda have to force the hop up unit in there but gently. If you just keep banging at it, you'll damage the inner barrel, the bucking and hop up unit itselt. But once it's in, the hop up unit should be able to move about whilst inside the chamber of the outer barrel.

Metal Slide and Barrel for Marui Glock 17 - YouTube

There is a notch on the hop up unit near the hop up chamber (where the BB enters) that will prevent you from inserting the unit into the outer barrel.. You need to lift that above the edge and then slide the hop up into place.

[.Zo]

Originally Posted by e-luder

It fits. It's just hard to get the hop up unit inside the chamber. The PGC outer Barrel is actually one of the best accommodating outer barrel out there for Glocks.



What is the "line marked" you are referring to?

Here's a video of the slide assembly take down on the G17. Fast Forward to the end. You kinda have to force the hop up unit in there but gently. If you just keep banging at it, you'll damage the inner barrel, the bucking and hop up unit itselt. But once it's in, the hop up unit should be able to move about whilst inside the chamber of the outer barrel.

Metal Slide and Barrel for Marui Glock 17 - YouTube

There is a notch on the hop up unit near the hop up chamber (where the BB enters) that will prevent you from inserting the unit into the outer barrel.. You need to lift that above the edge and then slide the hop up into place.

I got it in already lol I thought it was supposed to go further

But I cant figure out how to get this weird part back in its like a u shaped clip/spring with a v shaped notch sticking out on one side, I think maybe it has something to do with the slide release? its not shown on the parts diagram...

[Danke]

Good pictures in this guide.

http://airsoft-barracks.com/site/ind...down-guide-r42

[Monkey King]

Best way to upgrade/fix your TM glock is just buy the BEAUTIFUL/solid/well built/custom fitted/made with love ones that e is selling E is better at fixing/modding TM glocks than he is at breathing!