|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
February 7th, 2010, 16:34 | #16 | ||
* KNOWN LIAR *
|
Quote:
__________________
Quote:
|
||
February 7th, 2010, 16:42 | #17 | ||
Quote:
When buying barrels, the actual size doesn't really matter as much as the brand does. Prometheus is generally considered the best brand to buy inner barrels from. They stuff they produce is VERY high quality. If you are on a budget, Madbul v2 barrels are decent for the money. As for nozzles, piston heads, and most other mechbox parts, I still recommend Prometheus, or, if your on a bit of a budget, modify. You can buy just tons of great modify parts in canada from airsoftparts.ca Also, don't forget, ICS hop-ups are not compatible with after-market hop-up chambers without modification.
__________________
Quote:
Chinese proverb
|
|||
February 10th, 2010, 13:55 | #18 |
I have devised a list of the parts I'm going to be buying, but I would rather buy them in person. Are there any retail stores in the GTA that would have mainly a M4/m16 switch assembly?
|
|
February 10th, 2010, 15:00 | #19 |
Official ASC "Dumb Ass"
|
airsoftparts.ca is in the gta
__________________
|
February 10th, 2010, 15:32 | #20 |
February 10th, 2010, 15:58 | #21 |
Official ASC "Dumb Ass"
|
Pm jugglez
__________________
|
February 10th, 2010, 16:02 | #22 |
a.k.a. greenpunk_182
|
Hey,
With regards to your post about upgrades: I own an ICS M4 and have put well over $1000 worth of upgrades into it so from experience, I would suggest not changing the nozzle because it will more than likely cause feeding issues. Stick with the stock ICS one. For mags, the king arms ones work well and are a great value. http://www.airsoftparts.ca/store2/in...roducts_id=879 For alittle more than you budgeted for you can get 5 full metal mags that feed well. Hop up rubbers: go guarder clear....cheap and work really well with your targeted FPS If you have any other questions, pm me and I'll reply as quick as I can PS: Stick with airsoftparts.ca Best service you can get and local aswell!! Last edited by Green; February 10th, 2010 at 16:12.. Reason: spelling |
February 10th, 2010, 16:46 | #23 |
Thanks for the advice Greenpunk, I'll change my list around a little bit. I think I might stick with the standard Hi cap mag untill I realize how much I reload, and what type of mag I would like the most.
And thanks Pusangani, will do. |
|
February 10th, 2010, 17:43 | #24 |
Official ASC "Dumb Ass"
|
You will never get a sense of reloading with a hicap, best to get some midcaps or go to a game and ask to borrow some mags so u see whether u need mid aps or locaps or realcaps.
Even if u get midcaps and don't like them u can always just sell or trade them for lows/reals
__________________
|
February 10th, 2010, 21:52 | #25 |
I think I may just dive in a get a few mid caps then. Thanks.
|
|
February 15th, 2010, 20:02 | #26 |
I've been searching around for some metal revievers, and I can't seem to find any. A member on this site said they can only(rarely) be purchased on the classifiedss, is this the only way I can get my hands on a set(upper and lower, mainly looking for lower).
|
|
February 15th, 2010, 20:28 | #27 | |
Quote:
The lower receiver is restricted, or the "gun". You can get an upper receiver anywhere you want |
||
May 11th, 2010, 23:29 | #28 |
a.k.a. LastSpartan
|
Sorry for bumping this thread, but if you don't mind Rokor, I have a question about the Madbull Hop up.
I read somewhere there was some fitment issues when using the Madbull Hop up + Guarder Clear + Python V2. Can anyone confirm please? Thank you very much!
__________________
NEW BACON FOR SALE! "WHEN I DIE BURY ME UPSIDE DOWN SO THE WORLD CAN KISS MY ASS" -Platoon |
|
Bookmarks |
Thread Tools | |
|
|