Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Information Center > Newbie Tank
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Looking to get a new gun.

:

Newbie Tank

Reply
 
Thread Tools
Old March 12th, 2013, 21:40   #16
Styrak
 
Styrak's Avatar
 
Join Date: Jan 2007
Location: Saskatoon, SK
Send a message via MSN to Styrak
Quote:
Originally Posted by pestobanana View Post
CYMA is shit. Don't buy it. Given your budget, throw in a few extra dollars and get a KWA or VFC. Even G&G will do. If you know how to do gun work, get a CA and change the piston/piston head combo, and the hop up rubber and you're golden.
CYMA makes great AK's.
__________________

Airsoft Sales and Repair/Upgrade Services
Styrak is offline   Reply With Quote
Old March 12th, 2013, 22:07   #17
ccyg8774
 
ccyg8774's Avatar
 
Join Date: Jun 2012
Location: Brampton, ON
Quote:
Originally Posted by Hectic View Post
Also of note would be that a 47 should have a wood grip and a akm should have a "plastic" grip cant recall that type of plastic its called.
I think it is called bakelite.
__________________
ccyg8774 is offline   Reply With Quote
Old March 12th, 2013, 22:14   #18
pestobanana
Squid Porn Superstar, I love the tentacles!
 
pestobanana's Avatar
 
Join Date: Nov 2008
Location: Richmond Hill and Waterloo, Ontario
Quote:
Originally Posted by Styrak View Post
CYMA makes great AK's.
Their externals are close to the finish of the Type 56 I fired at the range, I'll give it that. I've just had very bad experiences with CYMA internals.
pestobanana is offline   Reply With Quote
Old March 12th, 2013, 22:19   #19
Juke16
 
Juke16's Avatar
 
Join Date: Sep 2009
Location: Toronto
Internals don't sound bad to me...
http://www.red-alliance.net/forum/in...5942#msg185942
Juke16 is offline   Reply With Quote
Old March 12th, 2013, 22:32   #20
pestobanana
Squid Porn Superstar, I love the tentacles!
 
pestobanana's Avatar
 
Join Date: Nov 2008
Location: Richmond Hill and Waterloo, Ontario
Quote:
Originally Posted by Juke16 View Post
My CM027 (MP5) was horribly inaccurate, and the motor burned out after two months
My friend's CM028 (AK47) came non functional
My friend's CM031 (AK74) was horribly inaccurate and inconsistent
My friend's CM032 (M14) stripped a bevel gear in the first few hundred rounds

Maybe I've only seen/had lemons.
pestobanana is offline   Reply With Quote
Old March 12th, 2013, 23:26   #21
phloudernow
 
phloudernow's Avatar
 
Join Date: Nov 2010
Location: Toronto - Ontario, Vancouver - B.C and Hong Kong
Send a message via MSN to phloudernow Send a message via Skype™ to phloudernow
Quote:
Originally Posted by Felonies View Post
VFC is a bit out of his Price range.
hmm i thought the E series were cheaper these days? well my mistakes then lol but still G&P will be right in his price range
__________________
Current Lineup:
VFC HK416 Custom
Custom Bowie Tactical x SAI Glock 17 (TM Base),
Custom SAI BLU Glock Build (Timberwolf Base)
Custom Zev Noveske Shooting Team Glock 34
Project Guns
Custom Zev Dragonfly G17 (Project) (In progress)
phloudernow is offline   Reply With Quote
Old March 12th, 2013, 23:37   #22
AlexBisnett
 
Join Date: Feb 2013
Location: Burlington - Ontario
Well its not that i dont like the jg m16, i love it. but its plastic body which i dont mind, but some people told me its not worth upgrading a cheap JG Gun. It shoots pretty solid but i would be interested in possible upgrades to improve the gun overall but have no clue what parts are good. Id even be willing to spend atleast 150 or 200 on upgrades. I already know i need a new battery and also a smart charger. its just the stock battery in the gun right now with the big connectors on it. If someone could direct me towards so decent ideas about upgrading that would be greatly appreciated.
AlexBisnett is offline   Reply With Quote
Old March 12th, 2013, 23:51   #23
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Quote:
Originally Posted by ccyg8774 View Post
I think it is called bakelite.
Yup thats the stuff. I was just drawing a blank for some reason lol

Quote:
Originally Posted by AlexBisnett View Post
Well its not that i dont like the jg m16, i love it. but its plastic body which i dont mind, but some people told me its not worth upgrading a cheap JG Gun. It shoots pretty solid but i would be interested in possible upgrades to improve the gun overall but have no clue what parts are good. Id even be willing to spend atleast 150 or 200 on upgrades. I already know i need a new battery and also a smart charger. its just the stock battery in the gun right now with the big connectors on it. If someone could direct me towards so decent ideas about upgrading that would be greatly appreciated.
Tightbore inner barrel.
A good hop up rubber. Maybe a whole hop up unit as well (try lonex)
You could open the gear box and stick a bearing spring guide in and reshim it. Maybe a pom piston head while your in there.
A merf 3.2 mosfet (with thisbyou can have 3rnd burst rof controol triger protection so u can go to lipo)
Change the connectors to deans for the install of the merf and just a beter connector.
Go to lipo batteries. Youll need a charger for them as well.
Your up around 200 with that stuff give or take a bit.
You can skip all that and buy a metal body for around the same price and save the other upgrades for when something breaks aside from the hop rubber and maybe a good tightbore those are two things i do to all my guns right outta the box
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old March 13th, 2013, 00:05   #24
AlexBisnett
 
Join Date: Feb 2013
Location: Burlington - Ontario
So do you recommend i just get a decent metal body and upgrade the rest once i really have to? I havent really messed with the hopup yet either, and would a 9.4v be a better battery to upgrade too? It came stock with a 8.4v 1500mah one.

And could you recommend a brand of metal body which would be a good buy compatable with my JG? Preferablly on the toronto site.
AlexBisnett is offline   Reply With Quote
Old March 13th, 2013, 00:26   #25
Hectic
Oh we do hate you, just never felt like wasting the time to give you a user title :P
 
Hectic's Avatar
 
Join Date: Apr 2007
Location: Toronto, Ontario
Ya with a 9.6 (not 9.4) you will notice lil better trigger response and rate of fire and with an m16 you have a tonne of space so you can use whatever battery you like most any one will fit.
And a good hop up rubber will make a difference in you range and accuracy most stock rubbers are prety crappy. Try a flat hop setup (a rubber with no nub and a flat or bridge bucking) you can get both for under 40 bucks with shipping.
Buy a good battery and charger.
Id wait for a metal body till yours cracks. Just an example i have a cyma mp5k with metal body and an echo1 m4 with a plastkc body and 12 inch rail and my mp5k (a short ass gun) is way heavier then my m4 (about the same size as your m16) so if you dont mind lugging the extra weight go for a metal body otherwise just stick with plastic.
That or you can just buy another gun (lord knows you can never have too many lol)
Maybe the AKM you wer lookin at (the lct akm full metal and wood 400fps out of the box stock 6.02 tightbore i think mayne 6.03 is around 400 bucks or so.
Cyma is cheaper they are still prety nice tho lil lower quality on the wood and metal and internals
Or a small gun like an mp5k or regular sized mp5. (again if you go cyma they are not too bad not great but not bad also metal where they are spose to be and in the 2-300 range.
There are a tonne of options.
Bottom line dont fix what aint broke.
If your gun works good use it if sokething breaks fix it
Tightbore (a good one that has a consistant bore like a pdi or prometheus or madbull.
And a good hop up rubber like a prometheus madbull lonex even a guarder
Those two things will make your shots more consistant and increase your range and accuracey you can do both for under 100 bucks depending what barrel you pic.
A promy bearrel will prolly run you 60-80 bucks and thatll prolly be the most expensive of the bunch
__________________
Quote:
Originally Posted by m102404 View Post
Hectic....FFS start writing in coherent sentences!!!
Quote:
Originally Posted by JDoorn View Post
Thanks Hectic,
While your posts are sometimes a difficult read, you sure are helpfull
Lvl. 3 certified sniper
FinchFieldAirsoft
Hectic is offline   Reply With Quote
Old March 13th, 2013, 15:52   #26
AlexBisnett
 
Join Date: Feb 2013
Location: Burlington - Ontario
Would a Intellect 8.4v 5000mah Large Battery be a good battery upgrade for my JG m16?
Im not looking for a faster ROF, which was said to be increased by using a 9.6v battery.

So the 8.4 5000mah would last alot longer right? I also plan on buying a smart charger
AlexBisnett is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Information Center > Newbie Tank

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 21:37.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.