JG SVD for Assault/Support?

[Jagd]

Personally I have a CYMA AK 105 and after some aftermarket upgrades (that cost me $100) plus a tightbore 6.03. My gun is shooting as straight as my friend's G&P M4.

This gun is ultra reliable and tbh I wish I did not had done all those upgrades from the go because I know an other guy who has one with almost stock internals and never failed him.

I don't know about all the CYMA line though, but CYMA AK's IMO are very good for the price.

Also FYI with a 455mm tightbore barrel installed and a SP90 modify spring, I am having a velocity of 340-345 FPS. So, if you want to do only the minimal in terms of upgrades (since you will have ot open the gearbox anyway to install the new spring, might as well clean-up,reshim and change the bushings at the same time)

Buy:

-Modify shims
-S90 Modify spring
-6 mm metal bushing to replace the nylon/ruber one.

You can find all this on airsoftparts.ca

[Crunk_Ain't_Dead]

Thanks Jagladex! I found all the parts on airsoftparts.ca and it looks like the parts will run me ~30$.

EDIT: I edited out the link because it links to where one can buy all black guns without being AV'd. I was made aware that this isn't good via PM.

[Jagd]

Originally Posted by MSDFS

Thanks Jagladex! I found all the parts on airsoftparts.ca and it looks like the parts will run me ~30$.

Could someone confirm that the Cybergun AKS74 being sold http://www.fileden.com/files/2007/1/...oft%20list.pdf here is the same as the CYMA AK 105?
It would make sense, but I'm not 100% sure.

It's not the exact same gun, your inner barrel lenght will be longer than the stock AK 105 (which is a shorter version 400 mm) the AK74 inner barrel should be the same lenght as an AK47 one which is 455 mm. Other than that, the mechbox,hop-up unit and the internals will be the same.

[pusangani]

That shouldn't be in the non av section

[Crunk_Ain't_Dead]

I'm not buying anything until I'm AV'd and have checked out the classifieds. I don't have a credit card to purchase this with anyway.

[smurata1]

Originally Posted by Shooting Addict

Can't say you can't till you've tried it

I'll second this. M14 SOCOMs are labeled CQB right on the box. EBRs with their stocks pushed in all the way are only about an inch longer than an AR15 carbine.

[L473ncy]

Originally Posted by Rock 'N' Roll Outlaw

Forget anything by Cybergun.

I'm not trying to be an asshole but you can't really make a blanket statement like that since Cybergun rebrands from anywhere and everywhere.

That being said, OP: A lot of cyberguns are cheap ass clones of clones (of clones) and even if you get a CYMA rebrand it's not that great (compared to say a CA or TM) but, still it's decent and a fine starter gun (much like the Kraken used as a "3d instruction manual").

[Shooting Addict]

Originally Posted by smurata1

I'll second this. M14 SOCOMs are labeled CQB right on the box. EBRs with their stocks pushed in all the way are only about an inch longer than an AR15 carbine.

I was thinking more of the time I used a m60 in a cqb match but I guess the EBR is just as good as a comparsion