KWC D.E. CO2 melt down

Redneck Jimbo · July 21st, 2008, 00:59

Hi everyone a couple of days ago I was showing off my Desert Eagle to a friend of mine who never heard of airsoft. In the middle of my first mag the inner barral disloged and slid out the front about an inch, the loading chamber (the part that connects to the inner barral and holds the hop up barring in place) pops out and the hop up barring hits me in the arm and is lost forever in my living room :banghead:. I have all the parts except the barring, but I don't know how to install the inner barrel. I have never disasembled that part before can anyone help me get Humpty Dumpty back together again?

Sorry I have no digital camera to illistrate.

six4 · July 21st, 2008, 02:02

Quote:

Originally Posted by Redneck Jimbo

Hi everyone a couple of days ago I was showing off my Desert Eagle to a friend of mine who never heard of airsoft. In the middle of my first mag the inner barral disloged and slid out the front about an inch, the loading chamber (the part that connects to the inner barral and holds the hop up barring in place) pops out and the hop up barring hits me in the arm and is lost forever in my living room :banghead:. I have all the parts except the barring, but I don't know how to install the inner barrel. I have never disasembled that part before can anyone help me get Humpty Dumpty back together again?

Sorry I have no digital camera to illistrate.

when you say hop up "barring" ( spelled bearing ) are you meaning the hop-up bucking,because they look similiar. if this is the case you might be able to fab a "bucking" replacement from the outer sheath of a piece of electrical wire. by the sounds of it you should seek out a gun tech in your area,i will see if i can find an online manual for your pistol. btw does it look like this?

http://cgi.ebay.com/KWC-Desert-Eagle...ayphotohosting

six4 · July 21st, 2008, 02:11

Quote:

Originally Posted by six4

when you say hop up "barring" ( spelled bearing ) are you meaning the hop-up bucking,because they look similiar. if this is the case you might be able to fab a "bucking" replacement from the outer sheath of a piece of electrical wire. by the sounds of it you should seek out a gun tech in your area,i will see if i can find an online manual for your pistol. btw does it look like this?

http://cgi.ebay.com/KWC-Desert-Eagle...ayphotohosting

its not a kwc manual but maybe the tm desert eagle manual could be of some assistance,,,good luck!

http://tech.airsoftcanada.com/TM/TM%...i_1%5b1%5d.gif

Redneck Jimbo · July 21st, 2008, 02:11

Yup it is.
I have the bucking im missing the little bearing that puts pressur on the bucking

Redneck Jimbo · July 21st, 2008, 02:20

that helped alot but my barral assembely isnt the same at the TM nor is it the same as the one in the KWC manual. Ill look into a gun doc hear in montreal but what i Kneed is somone just to tell me how to put the inner barral back together
Thanks for your help anywise

six4 · July 21st, 2008, 02:23

Quote:

Originally Posted by Redneck Jimbo

that helped alot but my barral assembely isnt the same at the TM nor is it the same as the one in the KWC manual. Ill look into a gun doc hear in montreal but what i Kneed is somone just to tell me how to put the inner barral back together
Thanks for your help anywise

YouTube - wee what a predicament

Redneck Jimbo · July 21st, 2008, 02:29

Ha ha! god its trew, I just baught the thing a few monthes ago Brand new in the box from Redwolf (befour I knew it was illegle and feal like shit because of it) I'v only put about 10 mags threw it.

Does aney one know of aney gun docs with experience in dealing with the KWC Desert Eagles

Redneck Jimbo · September 2nd, 2008, 17:02

long over do bump

the gun is still FUBAR is thare any one who has experience with KWC Desert Eagles or can help me out?

digital_blue · September 2nd, 2008, 17:39

I believe KWC hopup bearings are the same size as KSC glock hopup bearings...

Redneck Jimbo · September 2nd, 2008, 17:43

its not the hopup all the parts are fine and I have an new bearing.
its the barral I can't seam to figure out how to put the barral back in.

Redneck Jimbo · February 20th, 2009, 10:24

Just found my old thread on google. lol Trying remedy this problem STILL!!!!!!

How in gods name do I reinstall the inner barral?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 21st, 2008, 00:59	#1
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	KWC D.E. CO2 melt down Hi everyone a couple of days ago I was showing off my Desert Eagle to a friend of mine who never heard of airsoft. In the middle of my first mag the inner barral disloged and slid out the front about an inch, the loading chamber (the part that connects to the inner barral and holds the hop up barring in place) pops out and the hop up barring hits me in the arm and is lost forever in my living room :banghead:. I have all the parts except the barring, but I don't know how to install the inner barrel. I have never disasembled that part before can anyone help me get Humpty Dumpty back together again? Sorry I have no digital camera to illistrate.

July 21st, 2008, 02:29	#7
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	Ha ha! god its trew, I just baught the thing a few monthes ago Brand new in the box from Redwolf (befour I knew it was illegle and feal like shit because of it) I'v only put about 10 mags threw it. Does aney one know of aney gun docs with experience in dealing with the KWC Desert Eagles Last edited by Redneck Jimbo; July 21st, 2008 at 18:16..

September 2nd, 2008, 17:02	#8
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	long over do bump the gun is still FUBAR is thare any one who has experience with KWC Desert Eagles or can help me out? __________________ T.A.C.O. Tactical Airsoft Combat Operatives

July 21st, 2008, 02:11	#4
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	Yup it is. I have the bucking im missing the little bearing that puts pressur on the bucking

July 21st, 2008, 02:20	#5
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	that helped alot but my barral assembely isnt the same at the TM nor is it the same as the one in the KWC manual. Ill look into a gun doc hear in montreal but what i Kneed is somone just to tell me how to put the inner barral back together Thanks for your help anywise

September 2nd, 2008, 17:39	#9
digital_blue Trader rating Join Date: Aug 2006 Location: In the sticks	I believe KWC hopup bearings are the same size as KSC glock hopup bearings...

September 2nd, 2008, 17:43	#10
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	its not the hopup all the parts are fine and I have an new bearing. its the barral I can't seam to figure out how to put the barral back in. __________________ T.A.C.O. Tactical Airsoft Combat Operatives

February 20th, 2009, 10:24	#11
Redneck Jimbo Trader rating Join Date: Apr 2008 Location: Perth, On	Just found my old thread on google. lol Trying remedy this problem STILL!!!!!! How in gods name do I reinstall the inner barral? __________________ T.A.C.O. Tactical Airsoft Combat Operatives

KWC D.E. CO2 melt down

Doctor's Corner