Glock Thread!

RacingManiac · December 21st, 2008, 14:04

Retook some pic of the PGC slide Glock 26....removed the filling in the engraving(not very cleaningly done with a needle).....its actually quite deep and the engraving quality is very fine...I also like the finish of the slide alot, it has that slight brushed quality to it but the surface is smooth, it's probably my favorite kind of finish or any aftermarket slide I've seen. Even though its aluminum it has that steel look to it.

MilanWG · January 10th, 2009, 18:49

TM G26 Guarder Steel upgrades:

KEVORKIAN · January 17th, 2009, 23:54

Shirley · January 18th, 2009, 04:07

Oh sweet race 34!

Crunchmeister · January 24th, 2009, 23:57

A couple of new pics of my Glock 17 with its new G&P M3 light.

It's a lightly upgraded KSC G17 with a G&P metal slide and outer barrel. It also has a Madbull Black Python tight bore inner barrel which gives it good accuracy. It shoots about 300-320 fps with .2, depending on the temperature. Has a bit of wear and tear from heavy use, but has held up very well and is my most used pistol.

Sorry for a the lower quality pics. I'm not much of a photographer or photo editor.

Conscript · February 13th, 2009, 11:44

Meister two toned glock.

Lakonian · February 13th, 2009, 17:44

Ancorp and I were JUST talking about you, and those meisters. Damn, I want one. Price?

Conscript · February 13th, 2009, 18:04

You know how much I sell em for, go check my thread.

Wilson · February 13th, 2009, 18:56

My KWA G19 in its Blade-Tech belt holster, with the two additional mags in their Blade-Tech belt holster as well. Had to upgrade the mag catch to a steel one as the plastic one was almost completely worn down from practice.

Lakonian · February 13th, 2009, 18:58

Is that Donster's old glock, wilson?

Wilson · February 13th, 2009, 19:07

Quote:

Originally Posted by kos

Is that Donster's old glock, wilson?

GZA's.

szetor · February 13th, 2009, 23:43

The_Decider · February 14th, 2009, 03:08

Quote:

Originally Posted by szetor

Toyota?

lol
nice gun tho

szetor · February 14th, 2009, 12:16

ya its gonna be replaced w/ a streamlight sometime soon : )

Wilson · February 14th, 2009, 13:39

Does it fit into any holsters?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 21st, 2008, 14:04	#61
RacingManiac Trader rating Join Date: Sep 2006 Location: Canada/US	Retook some pic of the PGC slide Glock 26....removed the filling in the engraving(not very cleaningly done with a needle).....its actually quite deep and the engraving quality is very fine...I also like the finish of the slide alot, it has that slight brushed quality to it but the surface is smooth, it's probably my favorite kind of finish or any aftermarket slide I've seen. Even though its aluminum it has that steel look to it. __________________ My Arnies' Album My PBase Album Custom Pistol Whore...

January 10th, 2009, 18:49	#62
MilanWG Perroz Designs Trader rating Join Date: Jul 2003 Location: Toronto, ON	TM G26 Guarder Steel upgrades: __________________

January 17th, 2009, 23:54	#63
KEVORKIAN Trader rating Join Date: Nov 2006 Location: Manitoba	My little collection...TM based Glock 17/34 __________________ Kevorkian I SUPPORT THE USE OF SILICA BB BASTARDS!

January 18th, 2009, 04:07	#64
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Oh sweet race 34! __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

January 24th, 2009, 23:57	#65
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	A couple of new pics of my Glock 17 with its new G&P M3 light. It's a lightly upgraded KSC G17 with a G&P metal slide and outer barrel. It also has a Madbull Black Python tight bore inner barrel which gives it good accuracy. It shoots about 300-320 fps with .2, depending on the temperature. Has a bit of wear and tear from heavy use, but has held up very well and is my most used pistol. Sorry for a the lower quality pics. I'm not much of a photographer or photo editor. __________________

February 13th, 2009, 11:44	#66
Conscript AKaholic Trader rating Join Date: Jan 2005 Location: GTA	Meister two toned glock.

February 13th, 2009, 17:44	#67
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Ancorp and I were JUST talking about you, and those meisters. Damn, I want one. Price?

February 13th, 2009, 18:04	#68
Conscript AKaholic Trader rating Join Date: Jan 2005 Location: GTA	You know how much I sell em for, go check my thread.

February 13th, 2009, 18:56	#69
Wilson Trader rating Join Date: Aug 2003 Location: Ottawa, ON	My KWA G19 in its Blade-Tech belt holster, with the two additional mags in their Blade-Tech belt holster as well. Had to upgrade the mag catch to a steel one as the plastic one was almost completely worn down from practice. __________________ IN OMNIA PARATUS

February 13th, 2009, 18:58	#70
Lakonian kos Trader rating Join Date: Feb 2006 Location: Wherever.	Is that Donster's old glock, wilson?

February 13th, 2009, 23:43	#72
szetor Trader rating Join Date: Feb 2007 Location: Edmonton, AB

February 14th, 2009, 12:16	#74
szetor Trader rating Join Date: Feb 2007 Location: Edmonton, AB	ya its gonna be replaced w/ a streamlight sometime soon : )

February 14th, 2009, 13:39	#75
Wilson Trader rating Join Date: Aug 2003 Location: Ottawa, ON	Does it fit into any holsters? __________________ IN OMNIA PARATUS

Glock Thread!

Airsoft Media