RAS system for TM Aug

[rocksteady]

Hey there I'm looking for the Action RAS system or something similar for a TM Aug A2. I've googled a bit to no such luck and have noticed that Redwolf is sold out as well.

Any suggestions/help? Thanks in advance.

[Kos-Mos]

They don't make them anymore.

Good luck finding one.

You might have to get a JG AUG A3 and strip it from there (that's what I plan to do).

The quality is less, but this is the most viable option.

[Deadpool]

You could always buy a JG AUG A3 and put your internals in it. It's about the same price!

[Muffin]

Or get one of those sexy Phantom kits.

[rocksteady]

Took a couple solid hours of searching but I have found an RAS kit... unfortunately it's the sniper version so here's a few questions for you guys:

1) Can I use the stock barrel with the RAS receiver addition?

2) Am I going to have any problems with CBSA if I bring this up from the states?

[Muffin]

Originally Posted by rocksteady

Took a couple solid hours of searching but I have found an RAS kit... unfortunately it's the sniper version so here's a few questions for you guys:

1) Can I use the stock barrel with the RAS receiver addition?

2) Am I going to have any problems with CBSA if I bring this up from the states?

1) Yes, unless it states otherwise. Give a link to the RAS your talking about.

2)No.

[IRONSIGHT]

The only difference between the two kits is the barrel and you can use the stock one.

On importing one, you'll just have to pay duty on whatever price is marked on the package. (expect to pay $30-40. for something worth $250.-300.

[Voodoo]

phantoms are soo ugly, and the design is flawed. It is only held on by set screws and will eventually fall off.