MP5K external battery case ideas?

[pamparius]

hi, I want to use 11.1v LiPo battery or at least 9.6v NiMh for my Galaxy MP5K to crank up my ROF and I dont want to do any internal mods to fit those battery, I'm thinking to put a small size an/peq battery case but i cant find the smaller one than the an/peg ver 2, at the moment I'm using a battery pouch with velcro straps to put my battery... so anyone can give me ideas to put my battery so my MP5K still can bite and scream with good looks... the idea of an/peq is because i want to put in laser in it if there is enough space with the battery...

[CDN_Stalker]

Fuck looks, kill ability for the win!!! Black electrical tape is the way to go, can't do anything else for an MP5K.

[amano999]

I have seen one with a large battery bag on the side. I suppose you could try a low profile mount and PEQ as well.

[ColtFarmer]

http://www.airsoftcanada.com/showthread.php?t=62808

[pamparius]

Originally Posted by ColtFarmer

http://www.airsoftcanada.com/showthread.php?t=62808

cant open, i havent done any age verification (im 23)...

after several thinking i'll try the stick lipo battery to replace the stock, if doesnt fit i'll stick with the pouch...

[Luckless]

The link is to a red dot sight with an enlarged base, that holds a 8.4 mini battery inside.

[panda86]

Would it fit inside a double mag mod?

[thinh]

Another solution is to use a battery sling.

http://www.redwolfairsoft.com/redwol...l?prodID=17594

[Shirley]

That 11.1 might be too high for your gun. Think your gearbox will survive?

[Beazer]

if you have a pdw stock, you can mod it to. fit a 9.6 in it

[pamparius]

Originally Posted by Mr.Hitman

That 11.1 might be too high for your gun. Think your gearbox will survive?

yes, the gearbox will do fine as long as it is properly shimmed and replace the stronger gears, it got version 3 gearbox... i bought it in used condition which the previous owner upgraded with Guarder M120 spring it reached 420 fps with madbull m4 barrel i think, and now i downgraded it into 350fps also i replaced the piston, cylinder head, piston head and g&p m120 motor, prometheus mp5k inner barrel, now its gonna run like hell...... cant wait to test it...

[Marriott]

Originally Posted by CDN_Stalker

Fuck looks, kill ability for the win!!! Black electrical tape is the way to go, can't do anything else for an MP5K.

Well that’s just wrong

I bought a galaxy Mp5k. Then I added a CA Full Metal Body to it. I hollowed it out near the front end and put a 9.6v Intellect Stick battery in there. With the stock motor, being cleaned up and re-shimmed mine now shoots 18.8 bb's per second. If you wanted even faster all you need is to put a Systema Turbo motor in there for the crazy ROF in the mid 20's and high speed gears for even faster speeds. Simple really

I know you said about internal mods, but it really is worth doing with the mp5k. Did you mean internal mods as inside the gearbox? Or the Body?

I’ve done it lol... Also not using a PEQ or massive sight keeps it stock which looks the nuts for an Mp5k while keepign it manouverable for a seccond gun. I have it slung on my back all the time. If the situation gets hairy I heft the SPC in my right arm and then pull out the mp5k on single point sling then dual wield dishing out about 45 bb's per second on the other guy

It's just awesome...