|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 11th, 2008, 20:53 | #1 |
mp7 battery
anyone know the battery name ie LR44 or AAA
im trying to find a charger that wont over charge the battery's but ive had no luck and no place i go to has any idea what battery's they are even when i show then one . any ideas where i should look for a charger that will fit them
__________________
|
|
May 12th, 2008, 14:17 | #2 |
GBB Whisperer
|
It's simple, you take the charger that it came with, clip the wall wart off it - now you have an adapter. Strip the leads, figure out which is positive and which is negative and just plug it in to your standard hobby charger. Instant peak detection / fuzzy logic charging.
If you're looking specifically for a stand-alone charger, I can source it for you, but for the cost of them, you might as well just put it towards a full on charger that can handle all of your batteries. Unless you're looking at airsoft stores, there's NO WAY you'll find a charger for the MP7 pack. It's a proprietary pack made from Sanyo Cadnica N-500R 500mAh cells. Keep in mind that a pack is not a cell and a cell is not a pack. A cell is a part of a pack, and a pack is a collection of cells to achieve the required voltage. Rechargeable cells put out a nominal voltage of 1.2v. So if you needed a 7.2cell output, you would need to create a pack of six 1.2v cells. An LR44 or AAA battery is just a cell. To directly answer your question, they are "N" sized cells.
__________________
Advanced Airsoft Armaments and Enhancements Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed Last edited by ILLusion; May 12th, 2008 at 14:22.. |
May 12th, 2008, 14:20 | #3 |
__________________
"The Bird of Hermes is My Name, Eating My Wings to Make Me Tame." |
|
|
Bookmarks |
Thread Tools | |
|
|