Airsoft Canada

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Want to get a tightbore barrel for my CA M15 Rifle...

:

Upgrades & Modifications

Reply
 
Thread Tools
Old April 20th, 2008, 19:34   #1
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
Want to get a tightbore barrel for my CA M15 Rifle...

Today I had the chance to play my first game and fielded my M15A4 rifle as my main gun for most of the day. The gun has already been upgraded with Systema bearing spring guide, piston, silent piston head, silent cylinder head and tappet plate. I also have a Systema hopup rubber, but wiht the stock CA bucking. The spring is a Prometheus MS110SP spring. The gun shoots pretty consistently at about 360 fps and was a joy to field, having got me 4 kills.

The only thing I really want to do with this gun now is to increase its accuracy. It's quite accurate as it is now, but it needs a tightbore barrel to give it maximum accuracy. I've looked around and have seen tightbore barrels from all the main manufacturers. However, there seems to be a hell of a lot of choice - moreso that I can really differentiate as a noob that hasn't experienced tightbores yet.

I was wondering if one you more knowledgeable people could point me in the direction of which tightbore would be the best suited for my gun in its current configuration.
__________________

Last edited by Crunchmeister; April 20th, 2008 at 20:04..
Crunchmeister is offline   Reply With Quote
Old April 20th, 2008, 19:56   #2
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I run a Prometheus 6.03 in most of my guns, real accurate, I know for a fact you can use flying color and ksc perfects in them. The only thing is once you get a tightbore you should really be cleaning it out after every game.
ThunderCactus is offline   Reply With Quote
Old April 20th, 2008, 20:02   #3
Skladfin
 
Skladfin's Avatar
 
Join Date: Dec 2006
Location: Glace Bay, Nova Scotia
Prometheus, heard alot of good things about Madbull and also Deepfire ones.

PDI 6.01s are not worth the money really.
Skladfin is offline   Reply With Quote
Old April 20th, 2008, 20:03   #4
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
Quote:
Originally Posted by ThunderCactus View Post
I run a Prometheus 6.03 in most of my guns, real accurate, I know for a fact you can use flying color and ksc perfects in them. The only thing is once you get a tightbore you should really be cleaning it out after every game.
Thanks. That was one of the barrels that I was considering, so it's good to hear some feedback from someone who uses this barrel regularly in multiple guns. I always use Metaltech or Bastards now. They're apparently tightbore-friendly brands, so I don't think I'll have any jamming issues as long as I keep my barrels clean. I usually give my barrel a cleaning every time I use it for some more serious shooting (200+ rounds). Keeping the barrel clean won't be an issue for me.


Quote:
Originally Posted by Skladfin View Post
Prometheus, heard alot of good things about Madbull and also Deepfire ones.

PDI 6.01s are not worth the money really.
I have a Madbull 6.03 in my Glock and I like it a lot. That was another brand I was also considering. I also seemed to get the same info on the PDI 6.01. That was one I ruled out a month or so ago when I started looking into the tightbore. I was also considering Systema. Most of the internals and the hopup rubber are Systema, so might as well finish it off with Systema too.

So many options...

But in no way am I disapointed with the performance of my gun as it was today though. It was absolutely badass, powerful, and accurate. At about about 50 feet and shooting through brush, I left 3 nice welt's on the arm of the girl that was playing with us. This gun kicks ass. lol I think the tightbore is the only upgrade I could now do to this gun to make it perfect.
__________________

Last edited by Crunchmeister; April 20th, 2008 at 20:14..
Crunchmeister is offline   Reply With Quote
Old April 20th, 2008, 21:04   #5
ThunderCactus
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
 
ThunderCactus's Avatar
 
Join Date: Feb 2007
I got a bag of metaltechs for testing from A&A, and I don't know if it was just a really shitty batch of bbs or my hopup rubber didn't like them but they were all over the place and they even jammed my gun. Furthermore my friend with a gen3 PTW was using them and they were all over the place with the PTW as well. We switched to KSC perfects and both guns shot like they were supposed to.
Again I don't know if it was just a really bad batch or what was going on there, my friend with an M14 and tightbore swears by them.
ThunderCactus is offline   Reply With Quote
Old April 20th, 2008, 21:10   #6
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Sniper Hunt 2 last year, at chrony time, the supplied MechTech 0.20g jammed up almost every single gun with a tightbore (except my M24 with 6.03mm) but was rather amzing to see a half dozen guys clearing out their guns and reloading the mag to try to chrony again.

Only so much accuracy yo ucan get out of an Armalite, so hit up Jugglez and get a Deep Fire or other cheaper tightbore. Just make sure it's a stainless one, don't bother with the coated ones, they cause problems after repeated use. Prometheus is a very good brand, but pricy compared to say a DF 6.04mm (roughly a $20 difference, for close to same performance).
CDN_Stalker is offline   Reply With Quote
Old April 20th, 2008, 21:12   #7
Donster
 
Donster's Avatar
 
Join Date: Jul 2007
Location: GTA
i plan on getting a DB custom 6.01mm barrel for only 60 bucks from Airsoft GI. You can read more about the barrels here.
Donster is offline   Reply With Quote
Old April 21st, 2008, 10:51   #8
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
I've used mostly Systema 6.04mm tightbores, but more rather through happenstance than conscious choice. They've worked well with all the BBs I've put through them (KSC, MT, MB but the majority has been BB Bastards).

I had a DeepFire 6.04 SS barrel and it shot very nicely. It was 550mm long and shot nice tight groups.

Consistency in shot to shot FPS + length of barrel + tightbore = accuracy
m102404 is offline   Reply With Quote
Old May 5th, 2008, 11:38   #9
Crunchmeister
 
Crunchmeister's Avatar
 
Join Date: Nov 2007
Location: In your bedroom going though your underwear drawer
I ended getting a Deep Fire SS 6.04mm barrel. I haven't had a chance to shoot it outdoors yet to test its accuracy though. It did chrony about 10 fps higher than with the stock barrel.
__________________

Last edited by Crunchmeister; May 5th, 2008 at 11:43..
Crunchmeister is offline   Reply With Quote
Old May 5th, 2008, 13:28   #10
Zekk05
 
Join Date: Dec 2005
Location: Winnipeg
Send a message via ICQ to Zekk05 Send a message via AIM to Zekk05 Send a message via MSN to Zekk05 Send a message via Yahoo to Zekk05
Prometheus 6.03s w/ KSC Perfects for the win.
I have a Prom. barrel in my M14 and my SCAR and they both work like a dream.

Tried using a Deepfire tightbore in my C7A2.. ya, its gettin replaced. I find Deepfires are poor barrels. Very inconsistently made. Expect to see one in the for sale section very soon :P
__________________
Zekk05 is offline   Reply With Quote
Old May 5th, 2008, 13:36   #11
Roughneck
used to be Spencer aka Sue
 
Roughneck's Avatar
 
Join Date: Oct 2007
Location: Halifax, NS
I have a Prometheus 6.03 going in my M14 socom next week, looking forward to the results
__________________
Tpr. Spencer, DF
RCD C Sqn - CFB Gagetown

Please save for me, some gallantry
That will echo when I'm gone
Roughneck is offline   Reply With Quote
Old May 5th, 2008, 16:17   #12
AngelusNex
formerly Sepulcrum
 
AngelusNex's Avatar
 
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
I got a mad bull Black python ver2 6.03 in my 416 DMR, Hope I can out shoot you.
AngelusNex is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada

All times are GMT -4. The time now is 06:51.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.