|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 15th, 2008, 17:23
|
#1 |
|
MP5 upgrade ideas
I love my MP5 but its time for a change and i just cant bring myself to purchase a different kind of gun. right now i feel my gun is kind of pointless..... being a 400fps mp5 with a tightbore, at one time i was trying to overload my gun with power and distance but realized this wasnt practical to do to an mp5. i want to bring the mp5 to waht it actaully is.... i close range weapon with a fast ROF, heres some ideas...
Angel Piston Angel silent piston&cylinder head Angel bearing spring guide Angel tappet plate Systema high speed gears Systema M100 spring Prometheus/Laylax Bushings Firefly hopup bucking any thoughts on the parts used or suggestions for different/ more parts needed. |
|
|
|
|
January 15th, 2008, 17:50
|
#2 |
|
a faster motor would be boss
__________________
YANHCHAN'S AIRSMITHING: AEG repair/Tune up/Upgrades V2/V3 mechboxes, rewiring/reconnecting. Ask not what your country can do for you; ask what you can do for your country ~John F. Kennedy |
|
|
|
|
January 15th, 2008, 17:54
|
#3 | |
|
Official ASC Bladesmith
|
Quote:
Seriously, it CAN be down with an MP5, and it doens't have to be 400fps either. Part of the secret is in the ammo, use 0.28g and you'll see a huge difference in range and punch farther out, even past 150ft. Last edited by CDN_Stalker; January 15th, 2008 at 18:01.. |
|
|
|
|
|
January 15th, 2008, 18:07
|
#4 |
|
well, i have considered heavier bbs before but i want to stick to a more traditional mp5 setup with maybe around 300-350 fps and mind blowing rpm... and with the tightbore i have im already getting to about 150ft with a .25! upgraded hop up too. if anyone has any recomendations for a high speed setup or any aditional parts i would need thats apreciated
|
|
|
|
|
|
January 15th, 2008, 18:13
|
#5 |
|
Grab a m100 systema gear box with torque up or turbo motor, that should do it. Airsoftparts.ca has a sytema V2 turbo complete gear box and motor set for sale.
__________________
pain is temporary pride is forever Last edited by night*strike; January 15th, 2008 at 18:16.. |
|
|
|
|
January 15th, 2008, 18:24
|
#6 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
the cyl in that V2 box can push up to a 400mm inner (need to take off about an inch or so)barrel so you could build a countersniper if ya want no good for CQB but if its an sd you can put a cut down M4 inner or an M733 inner
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
|
January 15th, 2008, 19:12
|
#7 | |
|
shoulda grabbed the systema motor i had for sale, too late now
__________________
Quote:
|
|
|
|
|
|
January 15th, 2008, 21:33
|
#8 | |
|
Official ASC Bladesmith
|
Quote:
Ya, I have two MP5s, the one above shot 365fps last time I tested it, and my SD which I just rebuilt into a 320fps high fps CQB gun has a 330mm stock barrel, bearing spring guide, stock spring, running with an EG700 and 8.4V 3300mAh battery has a very high rate of fire. But I'm swapping things over after I clear my bench (hasn't been clear of guns for three going on four weeks now, and have about two weeks worth of client work left), my A5 thing will move to around 330-340fps for sniper use, and for CQB stuff, and my SD will go back to 385fps (or whatever it gets to when I'm done) for field use. Both have a really good rate of fire, I recommend the EG700 motor, simply because it's fast and hard working, reliable, easy to get, and NOT boutique. |
|
|
|
|
|
January 16th, 2008, 16:30
|
#9 |
|
Gold Plating would be something different:
__________________
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
