|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
January 20th, 2006, 17:08
|
#1 |
|
Replacing extractor on Marushin Kar98
Hey all, anyone who owns a Marushin Kar98 might discover after a while that when retracting the bolt to extract the shell, the shells may not be extracting as expected. What I did to rectify this problem was to replace the extractor on the bolt which is made out of plastic with a real extractor from a K98 bolt. It fits fine with a tiny bit of effort to place it on the bolt extractor collar. You may have to work the bolt in the receiver a few times back and forth but after that everything seems to work fine. Also, there are alot of complaints regarding the real K98 strippers not fitting in this rifle. With a very fine file, you can file the reciever down a tiny bit to allow the stippers to fit. You will not be able to tell this was done by looking at the reciever and the real strippers work wonderfully.
__________________
"A man should remember that he is not born solely for his own sake, but for his country, and for his family."   
|
|
|
|
June 6th, 2006, 14:24
|
#2 |
|
Now if only i could find real K98 parts...
|
|
|
|
|
|
June 6th, 2006, 14:44
|
#3 |
|
WW2 Airsofter
|
1
__________________
I can't measure my sig so I got this stupid tag line instead. Last edited by GMTII; May 4th, 2012 at 01:49.. |
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
